老化测试后外观评价

老化测试后外观评价

老化后灰标评级Evaluation of grey scale after Aging

GB/T 250-2008 Textiles.Tests for colour fastness.Grey scale for assessing change in colour纺织品.色牢度试验.评定变色用灰色样卡

ISO 105-A02:1993/Cor.2:2005(织物) Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour; Technical Corrigendum 2纺织品.色牢度试验.第A02部分:评定变色用灰色样卡.技术勘误2

EN 20105-A02:1994 Textiles - Tests for colour fastness - Grey scale for assessing change in colour纺织品.色牢度试验.第A02部分:色泽变化评定灰度等级

AATCC Evaluation Procedure 1-2012(织物)

ASTM D2616-19 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale用灰度标评定视觉色差的标准试验方法

ISO 105-A05-1996COR 2:2005(纺织品) Textiles - Tests for Colour Fastness - Part A05: Instrumental Assessment of Change in Colour for Determination of Grey Scale Rating ISO 105-A05: 1996, Including Technical Corrigendum 1: 1997纺织品.色牢度试验.第A05部分:变色程度的仪器评级方法ISO 105-A05-1996,包括技术修勘误1-1997

DIN EN ISO 105-A05-1997(纺织品) Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating纺织品.色牢度试验.第A05部分:变色程度的仪器评级方法

EN ISO 105-A05-1997(纺织品) Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating纺织品.色牢度试验.第A05部分:变色程度的仪器评级方法

AATCC EP7-2015e(纺织品) Evaluation Procedure for Instrumental Assessment of the Change in Color of a Test Specimen测试样品颜色变化的仪器评估评估程序

老化后沾色灰标评级Evaluation of grey scale for assessing staining Change after Aging

ISO 105-A03-2019(织物) Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining 纺织品. 染色牢度试验. 第A03部分:沾污评定用灰度标

EN 20105-A03:1994 Textiles - Tests for colour fastness - Grey scale for assessing staining纺织品.色牢度试验.第A03部分:沾污评定灰度等级

GB/T 251-2008 Textiles.Tests for colour fastness.Grey scale for assessing staining纺织品.色牢度试验.评定沾色用灰色样卡

AATCC Evaluation Procedure 2-2012(织物)

AATCC EP12--2017 Evaluation Procedure for Instrumental Assessment of Degree of Staining染色程度仪器评估的评估程序

ISO 105-A04-1989 Textiles Tests for colour fastness Part A04:Method for the instrumental assessment of the degree of staining adjacent fabrics纺织品.色牢度的测量,第A04部分:纺织品着色度仪器的评估方法

老化后色差Evaluation of Color Change after Aging

ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates计算仪器测量颜色的颜色容差和色差的标准实施规程

GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles漆膜颜色的测量方法 第1部分:原理

GB/T 11186.2-1989 Methods for measuring the colour of paint films--Part 2:Colour measurement漆膜颜色的测量方法 第2部分:颜色测量

GB/T 11186.3-1989 Methods for measuring the colour of paint films--Part 3:Calculation of colour differences漆膜颜色的测量方法 第3部分:色差计算

AATCC 173-2015(织物) CMC: Calculation of Small Color Differences for Acceptability颜色测量委员会(CMC):可接受性小色差的计算

BS EN ISO 105 J03:2009(纺织品) Textiles - Tests for colour fastness - Calculation of colour differences纺织品.色牢度试验.色差计算

老化后多角度色差Multi-Angle Color Difference after Aging

SAE J1545-2005 Instrumental Color Difference Measurement for Exterior finishes, Textiles, and Colored Trim外部涂层、织物和着色装璜料的色差仪器测量

ES-X63131:2011Clause 5.6.2

ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates计算仪器测量颜色的颜色容差和色差的标准实施规程

ASTM E1164-12(2017) Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation获取物体颜色评定用分光光度计数据的标准实施规程

ASTM E308-18 Standard Practice for Computing the Colors of Objects by Using the CIE System用CIE系统计算物体颜色的标准实施规程

DIN 6175-2019(取代DIN 6175-2:2001) Colour tolerances for automotive coatings - Solid and effect coatings汽车涂料的颜色公差 - 固体和效果涂料

老化后黄色指数Yellow Index after aging

ASTM E313-15(塑料、涂料) Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates计算仪器测量颜色坐标的白色和黄色指数的标准实践规程

盐雾实验后外观评级Evaluation of Appearance after Salt Spray

EN ISO 10289:2001 Methods of Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests金属制件上金属和其他无机覆盖层 经腐蚀试验的试验试样和制件的评级

ISO 10289:1999 Methods of Corrosion Testing of Metallic and Other Inorganic Coatings on Metallic Substrates - Rating of Test Specimens and Manufactured Articles Subjected to Corrosion Tests金属制件上金属和其他无机覆盖层 经腐蚀试验的试验试样和制件的评级

GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级

ASTM D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces涂漆钢表面锈蚀程度评价的试验方法

QB/T 3832-1999 Evaluation of the corrosion test results of the metal deposits for the light industrial products轻工产品金属镀层腐蚀试验结果的评价

老化后光泽变化Gloss Change after Aging

ASTM D523-14(2018) Standard Test Method for Specular Gloss镜面光泽度的标准试验方法

ASTM D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics塑料薄膜和固态塑料镜面光泽的标准试验方法

涂层老化后外观评估Evaluation after Aging for Coating

ISO 4628-1:2016(一般原则和等级表) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. General introduction and designation system涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.一般说明和指示系统

GB/T 30789.1-2015 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects ,and of intensity of uniform changes in appearance.Part 1:General introduction and designation system色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第1部分:总则和标识体系

ISO 4628-2:2016(起泡程度) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of blistering涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.起泡等级的评定

GB/T 30789.2-2014 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects,and of intensity of uniform changes in appearance.Part 2:Assessment of degree of blistering色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识:第2部分:起泡等级的评定

ASTM D714–02 (2009)(起泡程度) Standard Test Method for Evaluating Degree of Blistering of Paints涂料起泡程度评价的标准试验方法

ISO 4628-3:2016(腐蚀程度) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of rusting涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.生锈等级的评定

GB/T 30789.3-2016 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects,and of intensity of uniform changes in appearance.Part 3:Assessment of degree of rusting色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第3部分:生锈等级的评定

ISO 4628-4:2016(裂纹程度) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of cracking涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.裂纹等级的评定

GB/T 30789.4-2015 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects,and of intensity of uniform changes in appearance.Part 4:Assessment of degree of cracking色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第4部分:开裂等级的评定

ISO 4628-5:2016(剥落程度) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of flaking涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.剥落等级的评定

GB/T 30789.5-2015 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects, and of intensity of uniform changes in appearance.Part 5:Assessment of degree of flaking色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第5部分:剥落等级的评定

ISO 4628-6:2011(粉化程度,粘胶带评定法) Paints and varnishes-Evaluation of degradation of coatings-Designation of quantity and size of defects, and of intensity of uniform changes in appearance-Part 6:Assessment of degree of chalking by tape method涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第6部分:起霜程度的粘胶带评定方法

GB/T 30789.6-2015 Assessment of degree of chalking by tape method涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第6部分:起霜程度的粘胶带评定方法

ISO 4628-7:2016(粉化程度,velvet method) Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance. Assessment of degree of chalking by velvet method涂料和清漆.漆膜降解的评定.缺陷的量值和大小以及外观均匀变化强度的规定.用丝绒法评定粉化等级

GB/T 30789.7-2015 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects, and of intensity of uniform changes in appearance.Part 7:Assessment of degree of chalking by velvet method色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第7部分:天鹅绒布法评定粉化等级

ISO 4628-8:2012(分层和腐蚀程度) Evaluation of degradation of coatings ㅡ Designation of quantity and size of defects, and of intensity of uniform changes in appearance ㅡ Part 8: Assessment of degree of delamination and corrosion around a scribe涂料和清漆.漆膜降解的评定.缺陷量值、大小和外观均匀改变程度的规定.第8部分:评定划痕周围的层离和腐蚀等级

GB/T 30789.8-2015 Paints and varnishes.Evaluation of degradation of coatings.Designation of quantity and size of defects,and of intensity of uniform changes in appearance.Part 8:Assessment of degree of delamination and corrosion around a scribe or other artificial defect色漆和清漆 涂层老化的评价 缺陷的数量和大小以及外观均匀变化程度的标识 第8部分:划线或其它人造缺陷周边剥离和腐蚀等级的评定

客户要求

涂层老化后外观评级Evaluation of coating Appearance after Aging

GB/T 1766-2008 Paints and varnishes.Rating schemes of degradation of coats 色漆和清漆.涂层老化的评级方法

锈蚀蠕变等级评价Evaluation of rust creepage forscribed specimens

ASTM D1654-08(2016) Procedure A(金属涂层) Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments腐蚀环境中涂漆或覆层试样评估的标准试验方法

电镀产品老化后评级Rating of Electroplated Panels Subjected toAtmospheric Exposure

ASTM B537-70(2013)(电镀产品) Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure大气暴露下电镀面板定额的标准实施规程

白垩试验Chalking Test

ASTM D4214-07(2015) Method B Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films评定外用漆膜粉化程度的标准试验方法