高分子材料电学性能测试

高分子材料电学性能测试

防静电材料体积电阻率Volume resistance of static dissipative planar materials

ANSI/ESD STM11.12-2000 Test Method for Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials静电放电敏感的灵敏度试验防护试验方法.静态分散平面材料体电阻测量

IEC 61340-5-3: 2015(包装材料) Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive device静电学第5-3部分:电子设备防静电现象的保护 - 性能和要求静电放电敏感设备包装分类

IEC 61340-2-3:2016 Section 8(静电耗散材料) Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation静电学.第2-3部分:测定用于避免静电电荷积聚的固体材料的电阻和电阻率的试验方法


防静电材料表面电阻率Surface resistance of static dissipative planar materials

ANSI/ESD STM 11.11-2015 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials静电放电敏感性物件的防护.静态耗散平面材料表面电阻的测量

IEC 61340-5-3: 2015(包装材料) Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive device静电学第5-3部分:电子设备防静电现象的保护 - 性能和要求静电放电敏感设备包装分类

IEC 61340-2-3:2016 Section 8(静电耗散材料) Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation静电学.第2-3部分:测定用于避免静电电荷积聚的固体材料的电阻和电阻率的试验方法


介电强度、击穿电压Dielectric Strength, Dielectric breakdown voltage

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies绝缘材料的电气强度 - 测试方法 - 第1部分:功率频率测试

GB/T 1408.1-2016 Insulating materials. Test methods for electric strength. Part 1:Test at power frequencies绝缘材料 电气强度试验方法 第1部分:工频下试验

ASTM D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies固体电绝缘材料在商业电源频率下的介电击穿电压和介电强度的标准测试方法

ASTM D2671-13 Clause 20~25(电工用热收缩管) Test Methods for Heat-Shrinkable Tubing for Electrical Use电气用热收缩管道系统的试验方法

GB/T 13542.2-2009 18.1节(电气绝缘用薄膜) Film for electrical insulation. Part 2:Methods of test电气绝缘用薄膜.第2部分:试验方法

GB/T 1695-2005(硫化橡胶) Rubber, vulcanized. Determination of electrical breakdown strength and voltage resistant at commercial power frequency硫化橡胶.工频击穿电压强度和耐电压的测定方法

UL-746A:2012/Rev.12-2017 Clause 21(电气终端部件用材料) Polymeric materials - Short term property evaluations聚合材料.短期性能评定

IEC 60454-2:2007 Clause 17~18(压敏胶带) Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test电工用压敏胶带第2部分:试验方法

GB/T 8815-2008 (片材) Plasticized polyvinyl chloride(PVC) compounds for wire and cable电线电缆用软聚氯乙烯塑料

HG/T 3330-2012(绝缘漆) Determination of dielectric strength of insullac films绝缘漆漆膜击穿强度测定法


耐电压Voltage Resistance

ISO 8092-2:2005 Section 4.13(电子连接器) Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements道路车辆.车载电气线束的联结.第2部分:定义、试验方法和一般性能要求

ASTM D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies固体电绝缘材料在商业电源频率下的介电击穿电压和介电强度的标准测试方法

IEC 60243-1:2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies绝缘材料的电气强度 - 测试方法 - 第1部分:功率频率测试

GB/T 1408.1-2016 Insulating materials. Test methods for electric strength. Part 1:Test at power frequencies绝缘材料 电气强度试验方法 第1部分:工频下试验

GB/T 1695-2005(硫化橡胶) Rubber, vulcanized. Determination of electrical breakdown strength and voltage resistant at commercial power frequency硫化橡胶.工频击穿电压强度和耐电压的测定方法


介电常数和损耗因数Relative Permittivity and Dielectric Dissipation Factor

IEC 62631-2-1:2018(取代IEC 60250:1969) Dielectric and resistive properties of solid insulating materials - Part 2-1: Relative permittivity and dissipation factor - Technical Frequencies (0,1 Hz - 10 MHz) - AC Methods固体绝缘材料的介电和电阻特性 - 第2-1部分:相对介电常数和损耗因子 - 技术频率(0.1 Hz - 10 MHz) - AC方法

GB/T 1409-2006 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths测量电气绝缘材料在工频、音频、高频(包括米波波长存内)下电容率和介质损耗因数的推荐方法

GB/T 7265.1-1987 Test method for complex permittivity of solid dielectric materials at microwave frequencies--Perturbation method固体电介质微波复介电常数的测试方法 微扰法

IEC 61189-2-721: 2015 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2-721: Test methods for materials for interconnection structures - Measurement of relate电气材料、印制板和其他互连结构和组件的试验方法.第2-721部分:互连结构材料的试验方法.使用分裂柱介质谐振器在微波频率下测量覆铜板的相对介电常数和损耗正切

SJ/T 10142-1991 Detail specification for electronic components--Semiconductor integrated circuits电介质材料微波复介电常数测试方法.同轴线终端开路法

ASTM D150-18 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation固体电绝缘材料交流损耗特性和介电常数(介电常数)的标准试验方法


绝缘材料表面电阻率Surface Resistivity of Insulating Materials单位: Ω或Ω/square

IEC 62631-3-2:2015(取代IEC 60093:1980) Dielectric and resistive properties of solid insulating materials - Part 3-2: Determination of resistive properties (DC methods) - Surface resistance and surface resistivity固体绝缘材料的介电和电阻性能 - 第3-2部分:电阻性质的测定(Dc方法) - 表面电阻和表面电阻率

GB/T 31838.3-2019(取代GB/T 1410-2006) Solid insulating materials—Dielectric and resistive properties—Part 3: Resistive properties (DC methods)—Surface resistance and surface resistivity固体绝缘材料 介电和电阻特性 第3部分:电阻特性(DC方法) 表面电阻和表面电阻率

ISO 14309:2019(橡胶) Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity硫化或热塑性橡胶.体积和/或表面电阻率的测定

ASTM D257-14 Standard Test Methods for DC Resistance or Conductance of Insulating Materials绝缘材料的直流电阻或电导率的标准测试方法

GB/T 1692-2008(硫化橡胶) Vulcanized rubber. Determination of the insulation resistivity硫化橡胶.绝缘电阻率的测定


绝缘材料体积电阻率Volume Resistivity of Insulating Materials单位:Ω·m

IEC 62631-3-1:2016(取代IEC 60093:1980 ) Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method固体绝缘材料的介电和电阻性能 - 第3-1部分:电阻性质的测定(Dc方法) - 体积电阻和体积电阻率 - 一般方法

ISO 14309: 2019(橡胶) Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity硫化或热塑性橡胶.体积和/或表面电阻率的测定

GB/T 8815-2008 (片材) Plasticized polyvinyl chloride(PVC) compounds for wire and cable电线电缆用软聚氯乙烯塑料

ASTM D229-19e1 Section 41~46(刚性片材及塑料板) Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation用于电绝缘的刚性板和板材的标准测试方法

GB/T 31838.2-2019(取代GB/T 1410-2006) Solid insulating materials—Dielectric and resistive properties—Part 2: Resistive properties (DC methods)—Volume resistance and volume resistivity固体绝缘材料 介电和电阻特性 第2部分:电阻特性(DC方法) 体积电阻和体积电阻率

ASTM D257-14 Standard Test Methods for DC Resistance or Conductance of Insulating Materials绝缘材料的直流电阻或电导率的标准测试方法

GB/T 1692-2008 (硫化橡胶) Vulcanized rubber. Determination of the insulation resistivity硫化橡胶.绝缘电阻率的测定