纤维 Fiber

水分含量Moisture Content

ISO 3344:1997 Reinforcement products - Determination of moisture content增强制品.水份含量的测定

GB/T 9914.1-2013 Test method for reinforcement products.Part 1:Determination of moisture content增强制品试验方法 第1部分:含水率的测定

线密度Linear Density

ISO 1889:2009 Reinforcement yarns - Determination of linear density加固纱线.线密度的测定

GB/T 7690.1-2013 Reinforcements.Test method for yarns.Part 1:Determination of linear density增强材料 纱线试验方法 第1部分:线密度的测定

可燃物含量Combustible Matter Content

ISO 1887:2014 Textile glass. Determination of combustible-matter contentBS ISO 1887-2014 纺织玻璃纤维.可燃物质含量测定

GB/T 9914.2-2013

单位面积质量Mass per Unit Area

ISO 3374:2000 Reinforcement products - Mats and fabrics - Determination of mass per unit area增强制品.毯子和织物.单位面积质量的测定

GB/T 9914.3-2013 The method for reinforcement products.Part 3:Determination of mass per unit area

保水性Water Retention

ASTM C1511-15(玻璃绝缘纤维) Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)玻璃纤维绝缘材料(飞行器型)的水分保持(抵抗性)特征测定的标准试验方法

织物厚度Fabric Thickness

ISO 4603:1993+Amd.1:2010 Textile glass－Woven fabrics－Determination of thickness纺织玻璃纤维.织物.厚度的测定

GB/T 7689.1-2013 Reinforcements.Test method for woven fabrics.Part 1:Determination of thickness增强材料 机织物试验方法 第1部分:厚度的测定

拉伸断裂强力Tensile breaking force

ISO 3342:2011(玻璃纤维毡) Textile glass. Mats. Determination of tensile breaking force纺织玻璃纤维.织物.抗拉强度的测定

GB/T 6006.2-2013(玻璃纤维毡) Test method for glass mats.Part 2:Determination of tensile breaking force玻璃纤维毡试验方法 第2部分:拉伸断裂强力的测定

ISO 3341:2000(玻璃纤维丝) Textile glass - Yarns - Determination of breaking force and breaking elongation纺织玻璃纤维.纱线.断裂力和断裂伸长的测定

断裂伸长率Breaking elongation

ISO 3341:2000(玻璃纤维丝) Textile glass - Yarns - Determination of breaking force and breaking elongation纺织玻璃纤维.纱线.断裂力和断裂伸长的测定

树脂 Resin

初始固化温度Initial Curing Temperature

ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion塑料.差示扫描量热法(DSC).特征反应曲线温度和时间、反应焓和转化度的测定

表观粘度Apparent Viscosity

ISO 2555:2018 Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method塑料.液态或象乳胶或分散体一样的树脂.用单筒式旋转粘度计法测定表观粘度

反应热焓 Reactive Enthalpy

ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion塑料.差示扫描量热法(DSC).特征反应曲线温度和时间、反应焓和转化度的测定

固化度Curing Degree

ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry用差示扫描量热法测定热反应材料的反应热的标准试验方法

预浸料 Prepreg

单位面积纤维重量Fiber Mass per Unit Area

EN 2331:1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of the resin and fibre content and mass of fibre per unit area航空航天系列．纺织玻璃纤维预浸渍．测定单位面积树脂、纤维含量和纤维质量的试验方法

挥发份含量Volatile Content

EN 2330:1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of the content of volatile matter航空航天系列．纺织玻璃纤维预浸渍．挥发物含量测定的试验方法

ISO 9782:1993 Plastics－Reinforced moulding compounds and prepregs－Determination of apparent volatile－matter content塑料.增强模压化合物和聚酯胶片.表现挥发物测定

树脂含量/增强材料含量Resin/Reinforced Material Content

GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics玻璃纤维增强塑料树脂含量试验方法

单位面积重量Mass per Unit Area

EN 2329:1993 Aerospace series - Textile glass fibre preimpregnates -Test method for the determination of mass per unit area航空航天系列．纺织玻璃纤维预浸渍．单位面积质量测定的试验方法

ISO10352:2020 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area纤维增强塑料. 模塑料和预浸料. 单位面积质量和单位面积纤维质量的测定

ISO 536:2019 Raper and board. Determination of grammage纸和纸板. 克数的测定

DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version纺织品.织物.小样测定单位面积质量

固化度 Curing Degree

ISO 11357-5:2013 Plastics. Differential scanning calorimetry (DSC). Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion塑料.差示扫描量热法(DSC).特征反应曲线温度和时间、反应焓和转化度的测定

复合材料 Composites

纤维/树脂分数Fiber/Resin Fraction

GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics玻璃纤维增强塑料树脂含量试验方法

密度Density

ISO 1183-1: 2019 Method A Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method塑料.非泡沫塑料的密度测定方法.第1部分:浸入法、液体比重瓶法和滴定法

GB/T 1463-2005 Test methods for density and relative density of fiber reinforced plastics纤维增强塑料密度和相对密度试验方法

玻璃化转变温度Glass Transition Temperature

ISO 11357-2:2020 Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and glass transition step height 塑料. 差示扫描量热法(DSC). 第2部分: 玻璃化转变温度和玻璃化转变阶梯高度的测定

IPC-TM-650 2.4.25D:2017 Glass Transition Temperature and Cure Factor by DSC - DSC 的玻璃化转变温度和固化因子

热分解温度Thermal Decomposed Temperature

ASTM D3850-19 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)热解重量分析仪法对固体电绝缘材料快速热降解的试验方法

ISO 11358-1:2014(取代ISO/DIS 11358-1:2014) Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles塑料.聚合物的热重测定.第1部分:一般原理

拉伸强度Tensile strenght

ASTM D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials聚合物基复合材料的拉伸性能标准试验方法

ISO 527-5:2009 Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites塑料.抗拉性能的测定.第5部分:单向纤维的试验条件.增强塑料复合材料

ISO 527-4:1997 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites塑料.抗拉性能测定.第4部分:正交同性和正交异性纤维试验条件.增强塑料复合材料

GB/T 1040.4-2006 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites塑料.抗拉性能测定.第4部分:正交同性和正交异性纤维试验条件.增强塑料复合材料

GB/T 1447-2005 Fiber-reinforced plastics composites---Determination of tensile properties纤维增强塑料拉伸性能试验方法

BS 2782-10:Method 1003:1977(玻纤增强材料) Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1003:拉伸性能测定

GB/T 1040.5-2008 Plastic.Determination of tensile properties.Part 5:Test conditions for unidirectional fibre-reinforced plastic composites塑料.拉伸性能的测定.第5部分:单向纤维增强复合材料的试验条件

ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens用直边样品对热固性塑料的拉伸特性的标准试验方法

GB/T 3354-2014 Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials定向纤维增强聚合物基复合材料拉伸性能试验方法

拉伸模量Tensile modulus

ASTM D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials聚合物基复合材料的拉伸性能标准试验方法

ISO 527-5:2009 Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites塑料.抗拉性能的测定.第5部分:单向纤维的试验条件.增强塑料复合材料

GB/T 1040.5-2008 Plastic.Determination of tensile properties.Part 5:Test conditions for unidirectional fibre-reinforced plastic composites塑料.拉伸性能的测定.第5部分:单向纤维增强复合材料的试验条件

ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens用直边样品对热固性塑料的拉伸特性的标准试验方法

ISO 527-4:1997 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites塑料.抗拉性能测定.第4部分:正交同性和正交异性纤维试验条件.增强塑料复合材料

GB/T 1040.4-2006 Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites塑料.抗拉性能测定.第4部分:正交同性和正交异性纤维试验条件.增强塑料复合材料

GB/T 1447-2005 Fiber-reinforced plastics composites---Determination of tensile properties纤维增强塑料拉伸性能试验方法

BS 2782-10:Method 1003:1977(玻纤增强材料) Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1003:拉伸性能测定

GB/T 3354-2014 Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials定向纤维增强聚合物基复合材料拉伸性能试验方法

压缩强度Compressive strength

ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading过剪切载荷测定不支持测量部分的聚合物基复合材料压缩性能的标准试验方法

ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture使用联合荷载 (CLC) 测试夹具测定聚合物基复合材料压缩性的标准试验方法

GB/T 3856-2005(废止) Test method for compression properties of unidirectional fiber reinforced plastics单向纤维增强塑料平板压缩性能试验方法

GB/T 1448-2005 Fiber-reinforced plastics composites-Determination of compressive properties纤维增强塑料压缩性能试验方法

ISO 14126:1999/Cor.1:2001 Fibre-reinforced plastic composites-Determination of compressive properties in the in-plane direction纤维增强塑料混合物.水平方向压缩能力的测定

GB/T 23641-2018 Section 7.3 Fiber reinforced unsaturated polyester moulding compounds（SMC and BMC）for electrical purposes电气用纤维增强不饱和聚酯模塑料（SMC/BMC）

GB/T 23641-2018 Section 7.3 Fiber reinforced unsaturated polyester moulding compounds（SMC and BMC）for electrical purposes电气用纤维增强不饱和聚酯模塑料（SMC/BMC）

ASTM D695-15 Standard Test Method for Compressive Properties of Rigid Plastics硬质塑料压缩性能的标准试验方法

ISO 604:2002 Plastics . Determination of compressive properties塑料.压缩性的测定

GB/T 1041-2008 Plastics.Determination of compressive properties 塑料.压缩性能的测定

压缩模量Compressive modulus

GB/T 3856-2005(废止) Test method for compression properties of unidirectional fiber reinforced plastics单向纤维增强塑料平板压缩性能试验方法

GB/T 1448-2005 Fiber-reinforced plastics composites-Determination of compressive properties纤维增强塑料压缩性能试验方法

ASTM D695-15 Standard Test Method for Compressive Properties of Rigid Plastics硬质塑料压缩性能的标准试验方法

ISO 604:2002 Plastics . Determination of compressive properties塑料.压缩性的测定

ISO 14126:1999/Cor.1:2001 Fibre-reinforced plastic composites-Determination of compressive properties in the in-plane direction纤维增强塑料混合物.水平方向压缩能力的测定

GB/T 23641-2018 Section 7.3 Fiber reinforced unsaturated polyester moulding compounds（SMC and BMC）for electrical purposes电气用纤维增强不饱和聚酯模塑料（SMC/BMC）

ASTM D3410/D3410M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading过剪切载荷测定不支持测量部分的聚合物基复合材料压缩性能的标准试验方法

ASTM D6641/D6641M-16 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture使用联合荷载 (CLC) 测试夹具测定聚合物基复合材料压缩性的标准试验方法

GB/T 1041-2008 Plastics.Determination of compressive properties 塑料.压缩性能的测定

面内剪切强度In-plane shear strength，面内剪切模量In-plane shear modulus，极限剪切应变Maximum shear strain

ISO 14129:1997(±45º剪切) Fibre-reinforced plastic composites-Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method纤维增强塑料复合物.用45°拉伸试验方法测定包括平面剪切模数和强度在内的平面剪切应力/剪应变反应

剪切强度Maximum Shear Stress，剪切弹性模量Shear Modulus of Elasticity，极限剪切应变Maximum Shear Strain

ASTM D3518/D3518M-18(±45º剪切) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a plusmn;45deg; Laminate. ± 45℃层压板拉伸试验法测定聚合物基质合成材料平面内剪切应力反应性的标准试验方法

剪切强度Shear strength ，剪切弹性模量Shear modulus，极限剪切应变Maximum shear strain

GB/T 3355-2014(±45º剪切) Test method for in-plane shear response of polymer matrix composite materials聚合物基复合材料纵横剪切试验方法

剪切强度Ultimate Strength，剪切弹性模量Shear Modulus of Elasticity，极限剪切应变Ultimate Strain

ASTM D5379/D5379M-19(V型缺口梁方法) Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method用V形切口梁法测定复合材料剪切性能的标准试验方法

剪切强度Shear strength ，剪切弹性模量Shear modulus

GB/T 30970-2014(V型缺口梁方法) Test method for the shear properties of polymer matrix composite materials by V-notched beam method聚合物基复合材料剪切性能V型缺口梁试验方法

剪切强度Ultimate Strength, 剪切弹性模量Shear Modulus of Elasticity, 极限剪切应变Ultimate Strain

ASTM D7078/D7078M-20(V型缺口轨道方法) Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method用V型缺口剪切方法测定复合材料剪切性能的标准试验方法

剪切强度Ultimate Strength，剪切弹性模量Chord modulus of Elasticity，极限剪切应变Ultimate Strain

GB/T 28889-2012(V型缺口轨道方法) Test method for in-plane shear properties of composite materials复合材料面内剪切性能试验方法

面内剪切强度In-Plane Shear Strength

ASTM D3846 - 08(2015)(纤维增强塑料) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics增强塑料的平面剪切强度的标准试验方法

层间剪切强度Interlaminaer shear strength

ISO 14130:1997/Cor.1:2003 Fibre-reinforced plastic composites-Determination of apparent interlaminar shear strength by short-beam method纤维增强塑料合成物.短梁层间切变强度法

JC/T 773-2010 Fibre-reinforced plastics composites.Determination of apparent interlaminar shear strength by short-beam method纤维增强塑料 短梁法测定层间剪切强度

EN 2377:1989 Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength玻璃纤维增强的塑料规范.试验方法.表面层间剪切强度测定

GB/T 1450.1-2005 Fibre-reinforced plastic composites-Determination of interlaminar shear strength纤维增强塑料层间剪切强度试验方法

ISO 19927-2018 Fibre-reinforced plastic composites - Determination of interlaminar strength and modulus by double beam shear test纤维增强塑料复合材料。用双梁剪切试验测定层间强度和模量

冲压式剪切强度Punch-type shear strength

GB/T 1450.2-2005(纤维增强塑料) Fibre-reinforced plastic composites-Determination of the punch-type shear strength纤维增强塑料冲压式剪切强度试验方法

弯曲强度Flexual strength

GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties纤维增强塑料弯曲性能试验方法

IPC-TM-650:2007 Section 2.4.4.1(高温) Section 2.4.4(常温) Mechanical Test Methods机械测试方法

ISO 14125:1998/Cor.1:2001+Amd.1:2011 Fibre-reinforced plastic composites－Determination of flexural properties纤维增强塑料复合材料.挠性性能的测定

BS 2782-10:Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method塑料的试验方法.第10部分:玻璃纤维增强塑料.试验方法1005:挠曲特性测定.三点法

GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials定向纤维增强聚合物基复合材料弯曲性能试验方法

弯曲模量Flexual modulus

GB/T 1449-2005 Fibre-reinforced plastic composites-Determination of flexural properties纤维增强塑料弯曲性能试验方法

GB/T 3356-2014 Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials定向纤维增强聚合物基复合材料弯曲性能试验方法

ISO 14125:1998/Cor.1:2001+Amd.1:2011 Fibre-reinforced plastic composites－Determination of flexural properties纤维增强塑料复合材料.挠性性能的测定

BS 2782-10:Method 1005:1977 Methods of testing plastics. Glass reinforced plastics. Determination of flexural properties. Three point method塑料的试验方法.第10部分:玻璃纤维增强塑料.试验方法1005:挠曲特性测定.三点法

吸水率Water absorption

IPC-TM-650:2007 Section 2.6.2.1 Water Absorption, Metal Clad Plastic Laminates吸水性，金属复合塑料层压板

GB/T 1462-2005 Test methods for water absorption of fiber reinforced plastics纤维增强塑料吸水性试验方法

透光率Transmittance

JC/T 782-2017 Test method for visible transmittance of glass fiber reinforced plastic玻璃纤维增强塑料可见光透射比试验方法

平行层向剪切强度Parallel laminar shear strength

GB/T 1303.2-2009 5.5节 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes.Part 2:Test methods电气用热固性树脂工业硬质层压板.第2部分:试验方法

短梁强度Short Beam Strength

ASTM D2344/D2344M-16 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates聚合物基体复合材料及其层压件短梁强度的标准试验方法

准静态压痕力Quasi-Static Indentation Force

ASTM D6264/D6264M-17 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force测量纤维增强聚合物基复合材料对集中准静态压痕力的损伤阻抗的标准试验方法