皮革厚度Leather Thickness

ISO 2589:2016 Leather - Physical and mechanical tests - Determination of thickness (ISO 2589:2016)皮革.物理和机械试验.厚度的测定(ISO 2589-2016).

QB/T 2709-2005 Leather-Physical and mechanical tests-Determination of thickness 皮革.物理和机械试验.厚度的测定

ASTM D1813-13 Standard Test Method for Measuring Thickness of Leather Test Specimens皮件试样厚度测量的标准试验方法

抗张强度和伸长率Tensile strength and percentage extension

QB/T 2710-2018（家具用皮革） 皮革 物理和机械试验 抗张强度和伸长率的测定

针孔撕裂强度Determination of the stitch tear resistance

GB/T 17928-1999 Leather--Determination of the stitch tear resistance皮革 针孔撕裂强度测定方法

ISO 23910:2019 Leather. Physical and mechanical tests. Measurement of stitch tear resistance皮革.物理和机械试验.缝合抗撕裂性的测量

DIN EN ISO 23910:2019(取代DIN 53331:1980) Leather. Physical and mechanical tests. Measurement of stitch tear resistance皮革.物理和机械试验.缝合抗撕裂性的测量

医用手套密封性Detection of Holes in Medical Gloves

ASTM D5151-19 Standard Test Method for Detection of Holes in Medical Gloves医用手套漏孔检测的标准试验方法

耐撕裂Tear Resistance

EN 388:2016 Section 6.4（防护手套） Protective gloves against mechanical risks防机械危险的防护手套

环球软化点Ring and Ball Softening Point

GB/T 4507-2014 Standard test method for softening point of bitumen.Ring-and-ball apparatus沥青软化点测定法 环球法

ASTM D36/D36M−14 Standard test method for softening point of bitumen.Ring-and-ball apparatus沥青软化点测定法 环球法

GB/T 15332-94 Determination of the softening point of hot-melt adhesives--Ball and ring method热熔胶粘剂软化点的测定 环球法

GB/T 11409-2008 Test methods rubber antiagers and vulcanizing accelerators橡胶防老剂、硫化促进剂试验方法

GB 12007.6-89 Epoxide resins--Determination of softening point--Ring and ball method环氧树脂软化点测定方法 环球法

ISO 4625-1:2010 Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method色漆和清漆用粘合剂. 软化点的测定. 第1部分: 环-球法

表观粘度Aparent Viscosity

ISO 1652:2011（乳胶） Rubber latex. Determination of apparent viscosity by the Brookfield test method乳胶.Brookfield试验法测定表观粘度

pH值pH Value

ASTM E70-19(水溶液) Standard Test Method for pH of Aqueous Solutions With the Glass Electrode带玻璃电极水溶液的pH值测量用标准试验方法

ISO 976:2013（取代ISO 1148:1980） Rubber and plastics. Polymer dispersions and rubber lattices. Determination of pH橡胶和塑料.聚合物的分散性和胶乳.pH值测定

GB/T 6368-2008（表面活性剂—水溶液） Surface active agents.Determination of pH of aqueous solution.Potentiometric method表面活性剂.水溶液pH值的测定.电位法

ISO 4316:1977（表面活性剂—水溶液） Surface active agents; Determination of pH of aqueous solutions; Potentiometric method表面活性剂 水溶液pH值的测定 电位滴定法

GB/T 1545-2008（纸、纸板和纸浆） Paper,board and pulp.Determination of acidity or alkalinity纸、纸板和纸浆 水抽提液酸度或碱度的测定

GB/T 22875-2018(卫生纸) Super-absorbent polymer for sanitary towel and diapers纸尿裤和卫生巾用高吸收性树脂

GB/T 23436-2009（汽车风窗玻璃清洗液） Cleaning fluids for automotive windshield汽车风窗玻璃清洗液

GB/T 12010.4-2010（聚乙烯醇） Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 4:Determination for pH value塑料.聚乙烯醇材料(PVAL).第4部分:pH值测定

瓦楞纤维板胶水粘合部位耐水测试Water Resistance of Glue Bond of Corrugated Fibreboard

FEFCO TESTING METHOD Nº9

硅胶密封剂水溶液对铜、钢和铝的腐蚀性Corrosion of Brass,Steel and Aluminum over Water

MIL-A-46146B-1990+Amd.3-1992 Clause 4.5.3.2.6.1 ADHESIVES-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)防腐的保温固化硅粘合密封剂(用于敏感金属和设备)

硅胶密封剂对铜线的直接接触腐蚀Corrosion of Copper Wire by Direct Contact

MIL-A-46146B-1990+Amd.3-1992 Clause 4.5.3.2.6.2 ADHESIVES-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)防腐的保温固化硅粘合密封剂(用于敏感金属和设备)

硅胶密封剂对钢和铝的直接接触腐蚀Corrosion of Steel and Aluminum by Direct Contact

MIL-A-46146B-1990+Amd.3-1992 Clause 4.5.3.2.6.3 ADHESIVES-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)防腐的保温固化硅粘合密封剂(用于敏感金属和设备)

密度Density

GB/T 15223-2008（液体树脂） Plastics.Liquid resins.Determination of density by the pyknometer method塑料.液体树脂.用比重瓶法测定密度

拉伸强度Tensile Strength

GB/T 3686-2014（V带） Belt drives.V-belts and V-ribbed belts.Tensile strength and elongation test method V带和多楔带 拉伸强度和伸长率试验方法

断裂伸长率Elongation at Break 拉伸强度Tensile strength

DIN 53354:1981(人造革)(已废止) Testing of artificial leather; tensile test人造革的检验.拉伸试验

断裂伸长率Elongation 压缩和恢复Compression and recovery

SAE J1352-2019 Compression and Recovery of Insulation Paddings绝缘填充物的压缩性和回复性

拉伸强度Tensile strength

ASTM F152-95(2017)（衬垫材料） Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials非金属垫料抗拉试验的测试方法

耐折牢度试验Flex resistance test

ISO 32100:2018 Rubber- or plastics-coated fabrics. Physical and mechanical tests. Determination of flex resistance by the flexometer method橡胶或塑料涂层织物.物理和机械试验.用挠曲计测定耐曲挠性

ISO 5402-1:2017 Leather. Determination of flex resistance. Flexometer method皮革.抗挠曲测定.挠度仪法

QB/T 2714-2018 皮革 物理和机械试验 耐折牢度的测定

ASTM D6182 − 00 (2015) Standard Test Method for Flexibility and Adhesion of Finish on Leather皮革成品的粘性和柔性的标准试验方法

粘结强度Adhesion strength

ISO 252:2007（输送带） Conveyor belts. Determination of between constitutive elements输送带. 构成要件间的测定

剥离强度Adhesion Strength

ISO 11644:2009（皮革） Leather. Method of determination of adhesion of finish皮革. 涂层牢度的测定方法

QB/T 4448-2013（取代QB/T 3655-1999)（家具表面软质覆盖材料） Determination of peel strength of flexible overlaid materials in furniture surface家具表面软质覆面材料剥离强度的测定

接缝剥离强度Joints Peel Strength

GB/T 328.20-2007（沥青防水卷材） Test methods for building sheets for waterproofing Part 20: Bitumen sheets for waterproofing-resistance to peeling of joints建筑防水卷材试验方法 第20部分:沥青防水卷材 接缝剥离性能

拉伸强度Tensile Strength

GB/T 3690-2017 Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法

ISO 283:2015 Textile conveyor belts. Full thickness tensile strength, elongation at break and elongation at the reference load. Test method纺织品输送带.全厚度拉伸强度、断裂伸长和基准荷载延伸.试验方法

最大拉力和最大拉力时伸长率Maximum Tensile Force and Elongation at Maximum Tensile Force

GB 18242-2008第6.11节GB/T 328.8-2007（沥青防水卷材） Styrene butadiene styrene(SBS) modified bituminous sheet materials弹性体改性沥青防水卷材

穿刺强度 Puncture Resistance

ASTM E154/E154M-08a(2013)e1Section 10 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover与混凝土板下, 墙壁上土壤或地被植物接触的水蒸气抑制剂的标准试验方法

粘合强度Adhesion Strength

ISO 36:2017 Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics硬化或热塑橡胶.测定与柔质纤维粘合性

GB/T 532-2008 Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric硫化橡胶或热塑性橡胶与织物粘合强度的测定

EN 319: 1993 Electronic Signatures and Infrastructures (ESI) - Certificate Profiles - Part 3: Certificate profile for certificates issued to legal persons电子签名和基础设施(ESI). 证书配置文件. 第3部分: 颁发给法人的证书的证书配置文件

胶合强度Bond Strength

ASTM F904-16 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials挠性材料制类似层压制品的粘结强度或层间粘结度比较的试验方法

ASTM D952-15 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials薄板塑料和电绝缘材料粘结或凝聚强度的标准试验方法

抗折强度Bending load

ISO 10904:2011 Section 7.3.2, Annex C and E（纤维粘合板） Fibre-cement corrugated sheets and fittings for roofing and cladding屋顶和覆盖层纤维水泥波纹板及其配件

翘曲Warping

GB/T 4085-2015第6.6节（半硬质聚氯乙烯块状地板） Semirigid polyvinyl chloride floor tiles半硬质聚氯乙烯块状地板

加热尺寸变化率Dimensional Change Rate on Heating

GB/T 4085-2015第6.5节（半硬质聚氯乙烯块状地板） Semirigid polyvinyl chloride floor tiles半硬质聚氯乙烯块状地板

耐干热Resistance Dry Heat

BS EN 12722:2009+A1:2013（家具） Furniture - Assessment of surface resistance to dry heat家具.表面耐干热性评估

GB/T 17657-2013第4.47节 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

GB/T 7911-2013第7.3.4节 High-pressure decorative laminates.Sheets made from thermosetting resins热固性树脂浸渍纸高压装饰层积板(HPL)

GB 4893.3-2020（家具） Test of surface coatings of furniture—Part 3: Determination of resistance to dry heat家具表面漆膜理化性能试验 第3部分：耐干热测定法

ISO 4211: 2013（家具） Furniture. Tests for surface finishes. Assessment of resistance to dry heat家具. 表面处理试验. 耐干热评估

耐湿热Resistance to wet heat

BS EN 12721:2009+A1:2013（家具） Furniture - Assessment of surface resistance to wet heat家具.湿热表面抗性的评估

GB/T 17657-2013第4.49节 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

GB/T 7911-2013第7.3.5节 High-pressure decorative laminates.Sheets made from thermosetting resins热固性树脂浸渍纸高压装饰层积板(HPL)

LY/T 1700-2018 第6.3.4节 地采暖用木质地板

GB 4893.2-2020（家具） Test of surface coatings of furniture—Part 2: Determination of resistance to wet heat家具表面漆膜理化性能试验 第2部分：耐湿热测定法

ISO 4211-2: 2013（家具） Furniture - Tests for surface finishes - Part 2: Assessment of resistance to wet heat家具.表面试验.第2部分:耐湿热性的评定

单位面积重Weight per Unit Area

ISO 536: 2012（纸和纸板） Paper and board - Determination of grammage纸和纸板.克数测定

水蒸气透过率Water vapour transimission rate

EN 12086-2013（建筑用绝热产品） Thermal insulating products for building applications. Determination of water vapour transmission properties建筑物用隔热产品.水蒸汽气渗透性能的测定

EN 1931:2000+AC:2001（防水卷材） Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Determination of water vapour transmission properties防水用挠性板.屋顶防水用沥青,塑料和橡胶薄板.水蒸气渗透性测量

GB/T 6982-2003（包装容器） Test methods for water vapor permeability of flexible containers软包装容器透湿度试验方法

拉伸强度Tensile strength

ASTM D828-16（纸和纸板） Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus用恒速拉伸设备进行纸和纸板抗扯裂强度的标准试验方法

耐内撕裂（埃莱门多夫法）Internal tearing resistance（Elmendorf-typemethod）

TAPPI T414 OM-12（纸和纸板） Internal tearing resistance of paper (Elmendorf-type method)纸张的内部抗撕裂性（Elmendorf 型方法）

定量测定Determination of grammage

GB/T 451.2 -2002（纸） Paper and board-Determination of grammage纸和纸板定量的测定

耐热性Heat Resistance

BS EN 607: 2004 APPENDIX C Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Test for the assessment of carbon black dispersion in polyethylene and polypropylene电缆和光缆. 非金属材料的试验方法. 物理试验. 评估炭黑在聚乙烯和聚丙烯中的分散性的试验

耐热性Resistance at elevated temperature

GB/T 328.11-2007方法B(沥青和高分子防水卷材) Test methods for building sheets for waterproofing Part 11: Bitumen sheets for waterproofing-flow resistance at elevated temperature建筑防水卷材试验方法 第11部分:沥青防水卷材 耐热性

尺寸稳定性Dimensional stability

EN 1604: 2013（建筑用隔热产品） Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions建筑应用隔热产品. 指定温度和湿度条件下尺寸稳定性的测定

GB/T 17657-2013第4.34节 （人造板） Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

GB/T 7911-2013第7.3.7节 High-pressure decorative laminates.Sheets made from thermosetting resins热固性树脂浸渍纸高压装饰层积板(HPL)

纵向撕裂度Longitudinal Tearing Resistance

GB/T 22865-2008　第5.6节 牛皮纸

GB/T 455-2002 Pulp and board determination of tearing resistance纸和纸板撕裂度的测定

ISO 1974:2012 Paper. Determination of tearing resistance. Elmendorf method纸张.抗撕裂性测定.埃尔曼多法

内撕裂度Internal Tearing Resistance

ASTM D689-17 Standard Test Method for Internal Tearing Resistance of Paper纸张内部抗撕裂的标准试验方法

抗张强度Tensile property

GB/T 12914-2018（纸和纸板） Paper and board - Determination of tensile properties - Constant rate of elongation method (20 mm/min)纸和纸板.拉伸性能的测定.恒速拉伸法(20mm/min)

ISO 1924-2-2008（纸和纸板） Paper and board - Determination of tensile properties - Constant rate of elongation method (20 mm/min)纸和纸板.拉伸性能的测定.恒速拉伸法(20mm/min)

ISO 1924-3:2005（纸和纸板） Paper and board - Determination of tensile properties - Constant rate of elongation method (100 mm/min)纸和纸板.抗张性能的测定.恒速拉伸法(100 mm/min)

边压强度Edgewise crush resistance

GB/T 6546-1998(瓦楞纸板) Corrugated fibreboard--Determination of edgewise crush resistance瓦楞纸板边压强度的测定法

粘合强度Adhesion strength

ISO 8094：2013（钢丝绳芯输送带） Steel cord conveyor belts. Determination of adhesion strength of the cover to the core layer钢丝绳传送带. 核心层覆盖的粘合强度的测定

GB 17044-2013（钢丝绳芯输送带） Steel cord conveyor belts.Adhension strength test of the cover to the core layer 钢丝绳芯输送带 覆盖层与带芯层 粘合强度试验

粘合强度Cord-to-coating bond test

GB 5755-2013（钢丝绳芯输送带） Steel cord conveyor belts.Cord-to-coating bond test.Initial test and after thermal treatment钢丝绳芯输送带 绳与包覆胶粘合试验 原始状态下和热老化后试验

ISO 7623: 2015（钢丝绳芯输送带） Steel cord conveyor belts. Cord-to-coating bond test. Initial test and after thermal treatment钢丝绳芯输送带.缆索涂层粘合力试验.初始试验和后期热量处理

双边撕裂Double Edge Tear

ISO 3377-2:2016 Leather. Physical and mechanical tests. Determination of tear load. Double edge tear皮革.物理和机械试验.扯裂力的测定.双边扯裂

GB/T 16799-2018 Furniture leather家具用皮革

QB/T 2711-2005 Leather-Physical and mechanical tests-Determination of tear load-Double edge tear皮革.物理和机械试验.撕裂力的测定:双边撕裂

ASTM D2212−00(2015) Standard Test Method for Slit Tear Resistance of Leather皮革裂缝抗扯性标准试验方法

色牢度Colorfastness

ASTM D5053-03 (2015) Standard Test Method for Colorfastness of Crocking of Leather

耐摩擦色牢度Resistance to abrasion fastness

QB/T 1327-1991（皮革）皮革摩擦脱色的色牢度的标准试验方法

皮革拉伸强度和伸长率Tensile strength, elongation at a specifiedload and elongation at break

ISO3376:2020 Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension皮革.物理和机械试验.抗拉强度和伸长率的测定

耐磨Abrasion resistance

BS EN 13672:2004（人造草皮） Surfaces for sports areas - Determination of resistance to abrasion of non-filled synthetic turf运动场表面.非填装人工草皮的抗摩擦测定

脱色试验Abrasion resistance

ASTM D5264-98(2019) Standard Test Method for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester用苏瑟兰德摩擦试验机对印刷材料抗磨性的标准试验方法

拉伸性能Tensile Property

AS NZS 1301.448s:2007（纸和纸板） Methods of test for pulp and paper - Tensile strength of paper and paperboard (constant rate of elongation method)纸浆和纸的试验方法．纸和纸板的抗拉强度（等速伸长法）

克重Grammage

ISO 536: 2012（纸和纸板） Paper and board - Determination of grammage纸和纸板.克数测定

拉伸强度Tensile Strength

ASTM D3826-18 Practice for Determining Degradation End Point in Degradable Polyolefins Using a Tensile用张力测定可降解的聚烯烃中降解末端点的实施规程

GMW 3010-2009(最大力Maximum Force/伸长率Elongation) Determination of Tensile and Elongation Properties拉伸和延伸性能的测定

伸长率Elongation

ASTM D5278/D5278M − 09 (2017)（织物） Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)窄幅织物伸长的标准试验方法(静态负载试验)

拉伸强度Tensile strength

IEC 60512-16-4:2008（压接连接器） Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations电子设备用连接器.试验和测量.第16-6部分:触点和终端的机械试验.试验16f:终端的耐用性

拉伸强度Tensile strength

GB/T 20671.7-2006（橡胶软木条） Classification system and test methods for nonmetallic gasket materials-Part7:Standard test methods for tension testing of nonmetallic gasket materials非金属垫片材料分类体系及试验方法 第7部分:非金属垫片材料拉伸强度试验方法

拉伸强度Tensile strength

ISO 10765:2010(鞋类) Footwear. Test method for the characterization of elastic materials. Tensile performance鞋类. 弹性材料特征的试验方法. 拉伸性能

压缩变形Compression Deflection

MIL-DTL-83528F-2017 Clause 4.5.5（导电屏蔽弹性垫片） GASKETLNG MATERIAL, CONDUCTIVE, SHIELDING GASKET, ELECTRONIC, ELASTOMER, EMI/RFI GENERAL SPECIFICATION FOR 弹性垫片材料，导电，屏蔽垫片，电子，弹性体，EMI/RFI 一般规格

压缩和回复率Compressibility and recovery

ASTM F36-15（垫片材料） Standard Test Method for Compressibility and Recovery of Gasket Materials衬垫材料的可压缩性和复原性的标准试验方法

GB/T 20671.2-2006（垫片材料） Classification system and test methods for nonmetallic gasket materials-Part2:Standard test method for compressibility and recovery of gasket materials非金属垫片材料分类体系及试验方法 第2部分:垫片材料压缩率回弹率试验方法

压缩应力-应变性能Compression Stress-Strain

ASTM C165-07(2017) Procedure A（绝热材料） Standard Test Method for Measuring Compressive Properties of Thermal Insulations测量隔热材料压缩特性的标准试验方法

蠕变特性Creep properties

GB/T 14745-2017（包装缓冲材料） Test method of creep properties for package cushioning material包装用缓冲材料蠕变特性试验方法

静态压缩Static compression

GB/T 8168-2008（包装用缓冲材料） Testing method of static compression for packaging cushioning materials包装用缓冲材料静态压缩试验方法

摩擦因数Friction Factor

GB/T 21282-2007 附录C Rubber/plastics weatherstrip for automobile乘用车用橡塑密封条

冲击测试Impact Test

ISO 20126:2012+Amd1:2018 Section 5.7 Dentistry－Manual toothbrushes－General requirements and test methods牙科学.手动牙刷.通用要求和试验方法

镰刀弯Camber

GB/T 22344-2018 Polyester strapping for packaging包装用聚酯捆扎带

压缩性能Compression behavior

BS EN 826:2013（建筑绝热材料） Thermal insulating products for building applications. Determination of compression behaviour建筑物用的隔热产品.抗压缩性的测定

密度Density

ASTM F1315-17 Standard Test Method for Density of a Sheet Gasket Material密封垫板材料密度的标准测试方法

含水率Moisture Content

AS/NZS 4266.1:2017(取代AS/NZS 4266.3:2004) Reconstituted wood-based panels— Methods of testing Part 1: Base panels再造人造板—试验方法第 1 部分：底板

GB/T 17657-2013 第4.3节 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

GB/T 9846-2015 第6.3.2节 Plywood for general use普通胶合板

HG/T 2751-1996(R2017)（未增塑乙酸纤维素） 未增塑乙酸纤维素含水量的测定

GB/T 6284-2006(固体化工产品）Chemical products for industrial use General method for determination of water content The loss mass on drying method化工产品中水分测定的通用方法 干燥减量法

抗拉强度Bond strength

GB/T 17657-2013 第4.24节 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

胶结强度Joint strengh

EN 12228：2013(合成运动地面) Determination of individual and total sterols contents. Gas chromatographic method. Animal and vegetable fats and oils个体和总甾醇类含量的测定. 气相色谱法. 动植物油脂

加热减量Mass Loss on Heating

CNS 12528-1989 Cellulose Acetate Sheet for Spectacle Frames眼镜架用醋酸纤维素板

GB/T 3780.8-2019方法A（炭黑） Carbon black—Part 8：Determination of heating loss炭黑 第8部分：加热减量的测定

脱口力测试（扎带）

QB/T 4494-2013 5.4节 Self-locking polyamide cable ties自锁式聚酰胺扎带

外观评价热影响Visually Assessing the Effects of Heating

EN ISO 580:2005(取代EN 763) Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating塑料管和管道系统.喷射模铸热塑性配件.热效应直观评估法

吸水率Water Absorption

ASTM C1016-14 Standard Test Method for Determination of Water Absorption of Sealant Backing 40;Joint Filler41; Material密封剂<丁二烯橡胶>(填缝料)吸水率的测定的标准试验方法

IPC-TM-650:2007 Section 2.6.2.1 IPC TEST METHODS MANUAL IPC 测试方法手册

ASTM C1185-08(2016) Section 9 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards无石棉纤维水泥平面薄板、屋面板、侧墙面板和护墙板取样和试验用标准试验方法

GB/T 9775-2008(取代ISO 6308:1980) Gypsum plasterboard纸面石膏板

EN 1609:2013(建筑用隔热材料) Thermal insulating products for building applications. Determination of short term water absorption by partial immersion建筑物用隔热产品.通过部分浸湿测定短期吸水性

挥发物含量Volatile Content

GB/T 12010.2-2010 附录A Plastic.Poly(vinyl alcohol)(PVAL)materials.Part 2:Determination of properties塑料.聚乙烯醇材料(PVAL).第2部分:性能测定

ISO 4684: 2005 Leather. Chemical tests. Method for determination of volatile matters content皮革. 化学试验. 挥发性物质的测定方法

表面耐磨测试Resistance to surface wear

EN 438-2:2016+A1:2018 Clause 10 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Determination of properties装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).性能测定

耐油903#Oil Resistance

UL 50E-2020 Clause 8.13.4 (Draft)(DRAFT) UL Standard for Safety for Enclosures for Electrical Equipment, Environmental Considerations(草案)(草案)电气设备用外壳环境UL安全标准

耐刷水性Wettability by brushing

GB/T 22638.5-2016（铝箔） Test methods for aluminium and aluminium alloy foils—Part 5：Determination of wettability铝箔试验方法 第5部分：润湿性的检测

耐人工唾液Artificial saliva resistance

DIN 53160-1: 2010 Determination of the colourfastness of articles for common use - Part 1: Test with artificial saliva公共物品色牢度测定.第1部分:人造唾液试验

耐人工汗液Synthetic perspiration resistance

DIN 53160-2:2010（日用品） Determination of the colourfastness of articles for common use - Part 2: Test with artificial sweat公共物品色牢度测定.第2部分:人造汗水试验

耐液性Fluid resistance

ASTM F146-12(2019)e1（垫片材料）

GB/T 20671.3-2006（垫片材料）GB/T 20671.3-2020（2021.5.1生效）

耐久性Durability

GB/T 20671.9-2006（软木垫片） Classification system and test methods for nonmetallic gasket materials-Part9:Standard test method for binder durability of cork composition gasket materials非金属垫片材料分类体系及试验方法 第9部分：软木垫片材料胶结物耐久性试验方法

耐腐蚀Corrosion resistance

ISO 22775:2004 Method 2（鞋子上的金属配饰） Footwear－Test methods for accessories：Metallic accessories－Corrosion resistance

表面润湿张力Surface wetting tension

GB/T 22638.4-2016（铝箔） Test methods for aluminium and aluminium alloy foils—Part 4：Determination of surface wetting tension 铝箔试验方法 第4部分：表面润湿张力的测定

IEC TS 62073:2016 Method B（绝缘体） Guidance on the measurement of hydrophobicity of insulator surfaces 绝缘体表面疏水性测量指南IEC TS 62073:2016 Method C（绝缘体）

IEC TS 62073:2016 Method A（绝缘体） Guidance on the measurement of hydrophobicity of insulator surfaces 绝缘体表面疏水性测量指南IEC TS 62073:2016 Method C（绝缘体）

GB/T 22638.4-2016第7节 达因笔法 Test methods for aluminium and aluminium alloy foils—Part 4：Determination of surface wetting tension 铝箔试验方法 第4部分：表面润湿张力的测定

分子筛静态水吸附测试Static adsorbed water for molecular sieve

GB/T 6287-1986 Determination of static adsorbed water for molecular sieve分子筛静态水吸附测定方法

水分含量Water content

ASTM C1185-08(2016) Section 10 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards无石棉纤维水泥平面薄板、屋面板、侧墙面板和护墙板取样和试验用标准试验方法

GB/T 462-2008 Paper,board and pulp.Determination of moisture content of analytical sample纸、纸板和纸浆.分析试样水分的测定

ASTM E1064-16(有机液体)Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration采用库仑卡尔费瑟滴定法测定有机液体中水份的标准试验方法

ASTM D4017-02(2015)(涂料或涂料材料) Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method卡尔·费舍尔法测定涂料及相关物质中水份的标准试验方法

GB/T 6283-2008(化工产品) Chemical products.Determination of water Karl.fischer method(general method)化工产品中水分含量的测定.卡尔.费休法(通用方法)

GB/T 606-2003(化学试剂) Chemical reagent General method for the determination of water Karl Fischer method化学试剂 水分测定通用方法 卡尔.费休法

IEC 60814:1997 clause 2Insulating liquids. Oil-impregnated paper and pressboard. Determination of water content by automatic coulometric Karl Fisher titration绝缘液体. 油浸纸和纸板. 用自动库仑卡尔费瑟滴定法测定含水量

ASTM E203-16 Standard Test Method for Water Using Volumetric Karl Fischer Titration采用菲舍尔-卡尔容积滴定法测定水的标准试验方法

ASTM D6304-16e1(石油产品、润滑油和胶粘剂) Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration用库仑卡尔费歇尔滴定法测定石油产品、润滑油和添加剂中水含量的标准试验方法

ASTM D4672-18（聚氨酯原料） Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols聚氨酯原材料的标准试验方法:多元醇含水量的测定

GB/T 7600-2014 Determination of water content in transformer oils and turbine oils in service by coulometric method（运行中变压器油和汽轮机油）

透射比Transmittance

GB/T 2680-1994(建筑玻璃) Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定

ISO 9050-2003 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors建筑玻璃.光透率、日光直射率、太阳能总透射率及紫外线透射率及有关光泽系数的测定

GB/T 5433-2008（日用玻璃） Test method for the transmittance of domestic glass日用玻璃光透射比测定方法

可见光透射率Visible light transmittance

ISO 13468-1: 2019 Plastics－Determination of the total luminous transmittance of transparent materials－Part 1：Single beam instrument塑料.透明材料光透射率总量的测定.第1部分:单束发射仪器

JIS K7361-1: 1997 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single beam instrument塑料制品.透明材料总发光透射率的测定.第1部分:单光束仪器

JIS K7105-1981第5.5节方法A Testing methods for optical properties of plastics塑料光学性能的测试方法

JC/T 782-2017 Test method for visible transmittance of glass fiber reinforced plastic玻璃纤维增强塑料可见光透射比试验方法

GB/T 2680-1994第3.1节 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定

ISO 9050-2003第3.3节 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors建筑玻璃.光透率、日光直射率、太阳能总透射率及紫外线透射率及有关光泽系数的测定

GB/T 5433-2008 Test method for the transmittance of domestic glass

GB/T 5137.2-2002第4节日用玻璃光透射比测定方法

ISO 3538-1997第5.1节 Road vehicles - Safety glazing materials - Test methods for optical properties道路车辆 安全玻璃材料 光学性能试验方法

可见光反射率Visible light reflectance

GB/T 5137.2-2002第9节 Road vehicles-safety glazing materials-Test methods for optical properties汽车安全玻璃试验方法 第2部分;光学性能试验

ISO 3538-1997第5.5节 Road vehicles - Safety glazing materials - Test methods for optical properties道路车辆 安全玻璃材料 光学性能试验方法

紫外线透射率Ultraviolet transmittance

GB/T 2680-1994第3.10节 Determination of light transmittance,solar direct transmittance,total solar energy transmittance and ultraviolet transmittance for glass in building and related glazing factors建筑玻璃 可见光透射比,太阳光直接透射比、太阳能总透射比、紫外线透射比及有关窗玻璃参数的测定

ISO 9050-2003第3.6节 Glass in building - Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors建筑玻璃.光透率、日光直射率、太阳能总透射率及紫外线透射率及有关光泽系数的测定

白度Whiteness

QB/T 1503-2011(日用陶瓷) Test method for whiteness of domestic ceramics日用陶瓷白度测定方法

挥发物含量Volatile Content

GB/T 22875-2018附录B Super-absorbent polymer for sanitary towel and diapers纸尿裤和卫生巾用高吸收性树脂

不挥发物含量Nonvolatile Matter Content

ASTM D2834-95(2015) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes水乳液地板抛光剂、溶剂基地板抛光剂和聚合物乳液地板抛光剂中的不挥发物(总固体)的标准测试

涂层附着力Coating Adhesion

ASTM F2252/F2252M-13(2018) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape使用胶带评估柔性包装材料与油墨和涂层粘合性的标准实施规程

集装箱机械密封件拉伸测试Tensile test

ISO 17712:2013 Section 5.2 Freight containers. Mechanical seals货运集装箱. 机械式密封

集装箱机械密封件剪切测试Shear test

ISO 17712:2013 Section 5.3 Freight containers. Mechanical seals货运集装箱. 机械式密封

集装箱机械密封件弯曲测试Bending test

ISO 17712:2013 Section 5.4 Freight containers. Mechanical seals货运集装箱. 机械式密封

集装箱机械密封件拉伸冲击测试Impact test

ISO 17712:2013 Section 5.5 Freight containers. Mechanical seals货运集装箱. 机械式密封

表面形貌测试Surface morphology test

客户要求

微米级尺寸测量Micron scale measurement

客户要求

接缝疲劳测试Seam fatigue testing

QB/T 4043-2010 Polyvinyl chloride artificial leather for automotive汽车用聚氯乙烯人造革

Scott揉搓测试Scott type crease-flex test

JIS L1096:2010 Section 8.19.2Method B TESTING METHODS FOR WOVEN AND KNITTED FABRICS机织和针织面料的测试方法

GB/T 8948-2008 Section 5.16 Polyvinyl chloride artificial leather聚氯乙烯人造革

GB/T 8949-2008 Section 5.14 Polyvinyl chloride artificial leather聚氯乙烯人造革

皮革起皱测试Determination of leather wrinkling

LP-463KB-24-01:2006

加工质量Processing quality

VW 50134-2011 Section 7.1 用于汽车内部以外的成品件材料要求

VW 50133-2015 Section 7.1 大众汽车关于PA66材料成品件的质量要求

TL 52682-2011 Section 6.7

厚度Thickness

GB/T 3198-2010 3.3.1节&4.2节（铝及铝合金箔）GB/T 3198-2020（2021.2.1生效） Aluminium and aluminium alloys foils铝及铝合金箔

抗拉强度、延伸率Tensile strength、elongation

GB/T 3198-2010 3.4节&4.3节&GB/T 228-2002（铝及铝合金箔）GB/T 3198-2020（2021.2.1生效）

抗香烟灼烧性能Resistance to cigarette burning

GB/T 17657-2013 第4.45节 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

耐水解测试 Resistance to Hydrolysis in Water

QB/T 4671-2014(2017)方法A Test method for synthetic leather/artificial leather.Resistance to hydrolysis人造革合成革试验方法 耐水解的测定

落球冲击 Falling weight test

NALFA LF-01-2011 Section 3.6 美标强化地板检测

耐破度 Bursting Resistance

GB/T 8948-2008第5.13节 Polyvinyl chloride artificial leather聚氯乙烯人造革

GB/T 8949-2008 第5.15节 Polyvinyl chloride artificial leather聚氯乙烯人造革

密封螺栓直径Bolt seal diameter

ISO 17712:2013 Freight containers. Mechanical seals货运集装箱. 机械式密封

接触角Water Contact Angel

ASTM D5946-2017 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements用测量水接触角测量结果测定经电晕处理的聚合物薄膜的试验方法

ASTM D7334-08R13 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement用前进接触角法测量涂料、颜料和基质的表面润湿性的标准实施规程

GB/T 30693-2014 Measurement of water-contact angle of plastic films塑料薄膜与水接触角的测量

ISO 15989:2004/Cor.1:2007 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films塑料.薄膜和薄板.电晕处理薄膜的水接触角度的测量

表面自由能Surface Free Energy

DIN EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface 胶粘剂. 润湿性. 固体表面接触角和表面自由能测定

ISO 19403-2-2017 Static method Paints and varnishes - Wettability - Part 2: Determination of the surface free energy of solid surfaces by measuring the contact angle色漆和清漆. 亲水性. 第2部分: 通过测量接触角测定固体表面的表面自由能

ASTM D7490-13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements采用接触角测量固体涂料, 基质和颜料的表面张力的标准试验方法

表面张力-悬滴法Surface Tension-Pendant drop method

ISO 19403-3-2017 Paints and varnishes - Wettability - Part 3: Determination of the surface tension of liquids using the pendant drop method色漆和清漆. 亲水性. 第3部分: 采用悬滴法测定液体表面张力

拉伸强度和伸长率Tensile strenght & Elongation

IEC 60950-22：2016Clause 8.5 & Annex D.2 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors信息技术设备.安全.第22部分:室外安装设备

压缩测试Compression test

IEC 60950-22：2016Clause 8.5 & Annex D.3 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors信息技术设备.安全.第22部分:室外安装设备

泡油测试Oil immersion test

IEC 60950-22：2016Clause 8.5 & Annex D.4 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors信息技术设备.安全.第22部分:室外安装设备

亮度因数Y，色度值x和yLuminance factor Y, chromaticity values x and Y

CIE 15-2004（反光服，道路标识） Colorimetry比色法

残氧量Headspace Remaining Oxygen Content

客户要求

表面粗糙度Roughness

GB/T 14234-1993（塑料件) Surface roughness for plastic parts塑料件表面粗糙度

弯曲挺度（恒定弯曲法） Bending stiffness (Constant rate of deflection)

GB/T 23144-2008 第4.1节 Paper and board.Determination of bending stiffness by static methods.General principle纸和纸板.静态弯曲挺度的测定.通用原理

ISO 5628:2019 Paper and board-Determination of bending stiffness-General principles for two-point, three-point and four-point methods纸和纸板.抗弯硬挺度的静态测定法.一般原理

GB/T 22364-2018 Paper and board—Determination of bending resistance 纸和纸板 弯曲挺度的测定

ISO2493-1:2010 Paper and board. Determination of bending resistance. Constant rate of deflection纸和纸板.抗弯曲测定.恒速偏转

VDA 230-209-2008汽车皮革、塑料幅面产品及纺织品 - 确定其弯曲特性

单簇草丝拔出力Single tuft pulling power

GB/T 20394-2019 第6.14节 Gymnastic artificial turf体育用人造草

QB/T 1090-2019地毯 簇拔出力的测定

环向抗拉强度Loop tensile strength

IEC 62275-2018 第5.9节 Cable management systems - Cable ties for electrical installations电缆管理系统. 电气装置用电缆扎带