灰分、增强材料、树脂含量和煅烧损失—高温煅烧法 Ash, Reinforced materials, Resin Content and Ignition Loss by High Temperature Calcination Method

碳黑含量Carbon black content

ISO 11358-1:2014（烯烃塑料） Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles塑料.聚合物的热重测定.第1部分:一般原理

ASTM D6370-99(2019)（橡胶） Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) 橡胶的标准试验方法&x2014；通过热重分析（TGA）进行成分分析

灼烧损失 Ignition Loss

ASTM F495-99a(2019)(垫圈材料) Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures暴露于高温下垫片材料重量损失的标准试验方法

ASTM D2584-18 (固化增强树脂) Standard Test Method for Ignition Loss of Cured Reinforced Resins固化增强树脂燃烧损失的标准试验方法

BS 2782-10: Method 1002:1977(Glass reinforced Plastic) Rubber, vulcanized or thermoplastic. Determination of permeability to gases. Equal-pressure method硫化或热塑橡胶. 透气性的测定. 等压法

玻璃纤维含量Glass fiber content

ASTM D3171-15 Method 1 procedure G(复合材料) Standard Test Methods for Constituent Content of Composite Materials复合材料成分含量的标准试验方法

ISO 1172:1996(玻璃纤维增强塑料) Textile-glass-reinforced plastics - Prepregs, molding compounds and laminates - Determination of the textile-glass and mineral-filler content-Calcination methods纺织玻璃纤维增强塑料预浸料 模塑料和层压板纺织玻璃和矿物填料含量的测定煅烧方法

GB/T 2577-2005(玻璃纤维增强塑料) Test method for resin content of glass fiber reinforced plastics玻璃纤维增强塑料树脂含量试验方法

灰分Ash content

ISO 247:2006（橡胶） Rubber - Determination of ash橡胶.灰分的测定

ISO 247-1-2018 Rubber — Determination of ash — Part 1: Combustion method橡胶 - 灰分测定 - 第1部分:干燃技术

ASTM D4574-06(2017) (橡胶) Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content橡胶复合材料的标准试验方法灰分含量的测定

ASTM D5667-95(2015) Part A（橡胶） Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash合成橡胶总灰分和水溶性灰分的标准试验方法

ASTM D5667-95(2015) Part B（橡胶） Standard Test Method for Rubber From Synthetic Sources—Total and Water Soluble Ash合成橡胶总灰分和水溶性灰分的标准试验方法

GB/T 4498.1-2013 Rubber. Determination of ash. Part 1:Muffle furnace method 橡胶 灰分的测定 第1部分:马弗炉法

ASTM D5040-90(2016) (胶粘剂) Standard Test Methods for Ash Content of Adhesives对于胶粘剂的灰分含量的测试方法

EN 1246:1998 (胶粘剂) Adhesives - Determination of ash and sulfated ash胶粘剂.灰分和硫酸盐灰分的测定

ASTM D2617-17a(皮革) Standard Test Method for Total Ash in Leather皮革总灰分标准测试方法

ISO 2144:2019（纸、木板和纸浆类） Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C纸、纸板、纸浆和纤维素纳米材料.在900℃下点火时残留物（灰分含量）的测定

ISO 1762:2019（FZ-T 50010.5）(纸、木板和纸浆类) Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C纸、纸板、纸浆和纤维素纳米材料.在525℃下燃烧时残渣（灰分含量）的测定

GB/T 17931-2018 Clause 6.11（瓶用聚对苯二甲酸乙二醇醋(PET)树脂） Poly(ethylene terephthalate) (PET) resin for bottles瓶用聚对苯二甲酸乙二酯（PET）树脂

GB/T 12496.3-1999（木质活性炭） Test methods of wooden activated carbon-Determination of ash content木质活性炭试验方法 灰分含量的测定

ASTM D1506-15 Method A Standard Test Methods for Carbon Black—Ash Content炭黑的标准试验方法&x2014，灰分

ISO 3451-1:2019(塑料通用方法) Plastics — Determination of ash — Part 1: General methods塑料 - 灰分测定 - 第1部分:一般方法

GB/T 9345.1-2008(塑料通用方法) Plastics. Determination of ash.Part1:General methods塑料.灰分的测定.第1部分:通用方法

ASTM D5630-13(塑料通用方法) Standard Test Method for Ash Content in Plastics塑料中灰分含量的标准试验方法

ISO 3451-2:1998 (聚对苯二甲酸烯烃酯) Plastics－Determination of ash－Part 2：Poly(alkylene terephthalate) materials塑料.灰分的测定.第2部分:聚对苯二甲酸亚苯基酯法

GB/T 9345.2-2008 (聚对苯二甲酸烯烃酯) Plastics－Determination of ash－Part 2：Poly(alkylene terephthalate) materials塑料.灰分的测定.第2部分:聚对苯二甲酸亚苯基酯法

ISO 3451-3:1984 (未增塑的醋酸纤维素) Plastics－Determination of ash－Part 3：Unplasticized cellulose acetate塑料灰分的测定第3部分:未增塑醋酸纤维素

ISO 3451-4:1998 (聚酰胺) Plastics－Determination of ash－Part 4：Polyamides塑料.灰分的测定.第4部分:聚酰胺

GB/T 9345.4-2008 (聚酰胺) Plastics－Determination of ash－Part 4：Polyamides塑料.灰分的测定.第4部分:聚酰胺

ISO 3451-5:2002 (聚氯乙烯) Plastics — Determination of ash-Part 5: Poly(vinyl chloride) 塑料 - 灰分的测定 - 第5部分:聚（氯乙烯）

GB/T 9345.5-2010 (聚氯乙烯) Plastics — Determination of ash-Part 5: Poly(vinyl chloride) 塑料 - 灰分的测定 - 第5部分:聚（氯乙烯）

树脂含量 Resin content

GB/T 2577-2005(玻璃纤维增强塑料) Test method for resin content of glass fiber reinforced plastics玻璃纤维增强塑料树脂含量试验方法

可提取物含量—萃取法Extractable Matter Content by Extraction Method

溶剂不可溶分含量（固化度）Solvent Insoluble Matter Content (Curing Degree)

GB/T 2576-2005 Test method for insoluble matter content of resin used in fiber reinforced plastics纤维增强塑料树脂不可溶分含量试验方法

溶剂可溶分含量Solvent soluble Matter content

ISO 6427:2013(塑料) Plastics - Determination of matter extractable by organic solvents (conventional methods) 塑料.有机溶剂萃取物的测定(常规法)

ISO 1407:2011（橡胶）Method A、B、C Rubber. Determination of solvent extract橡胶.溶剂提取物的测定

GB/T 3516-2006 (橡胶)方法A、B Rubber. Determination of solvent extract橡胶 溶剂抽出物的测定

合成生胶凝胶含量的测定Determination of gel content of raw synthetic rubber

SH/T 1050-2014 Determination of gel content of raw synthetic rubber合成生橡胶凝胶含量的测定

二叔丁基过氧化物（DTBP）残留量Residual of DTBP

GB/T 30923-2014 附录A Plastics. Polypropylene materials for melt blown塑料 聚丙烯(PP)熔喷专用料

热学性能—分析仪器法Thermal Property by Analytical Instrument Method

热重分析Thermogravimetry Analysis

ISO 9924-1:2016（橡胶）Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers橡胶和橡胶制品 用热裂解法测定硫化和未硫化化合物的成分 第1部分:丁二烯、乙烯－丙烯共聚物和三聚物、异丁烯－异戊二烯、异戊二烯和丁二烯橡胶

GB/T 14837.1-2014（橡胶） Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Part 1:Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第1部分:丁二烯橡胶、乙烯-丙烯二元和三元共聚物、异丁烯-异戊二烯橡胶、异戊二烯橡胶、苯乙烯-丁二烯橡胶

ISO 9924-2:2016（橡胶） Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halo butyl rubbers橡胶和橡胶制品.用热重量分析法测定硫化和未硫化化合物的成分.第2部分:丙烯腈丁二烯和卤化丁基胶橡胶

GB/T 14837.2-2014（橡胶） Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadiene and halo butyl rubbers橡胶和橡胶制品.用热重量分析法测定硫化和未硫化化合物的成分.第2部分:丙烯腈丁二烯和卤化丁基胶橡胶

ISO 9924-3:2009 (橡胶） Rubber and rubber products－Determination of the composition of vulcanizates and uncured compounds by thermogravimetry－ Part 3：Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction橡胶和橡胶制品.用热裂解法测定硫化和未硫化化合物的成分.第3部分:烃类橡胶、卤化橡胶和萃取后聚硅醚橡胶

ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry用热重分析法进行成分分析的标准试验方法

ASTM D6370-99(2019)（橡胶） Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA) 橡胶的标准试验方法&x2014；通过热重分析（TGA）进行成分分析

热分解温度Thermal Decomposition Temperature

ASTM D3850-19(固体电绝缘材料） Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA) 固体电绝缘材料通过热重法（TGA）快速热降解的标准试验方法

IPC -TM-650 2.4.24.6:2006（热固性材料层压电路板） TEST METHODS MANUAL测试方法手册

IPC -TM-650 2.3.40:1995（有机薄膜） Thermal Stability热稳定性

GB/T 4722-2017第6.9节 Test methods for rigid copper clad laminates for printed circuits board印制电路用刚性覆铜箔层压板试验方法

热稳定性Thermal Stability

ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry热重分析的热稳定性标准试验方法

ISO 11358-1:2014(塑料) Plastics. Thermogravimetry (TG) of polymers. General principles塑料.聚合物的热重分析法(TG).一般原理

玻璃化转变温度Glass transition temperature Tg(DSC法)

ASTM D6604-00(2017)(烃树脂) Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry通过差示扫描量热法测定烃树脂的玻璃化转变温度的标准实践

ASTM E1356-08(2014) Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry通过差示扫描量热法分配玻璃化转变温度的标准测试方法

ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry通过差示扫描量热法进行聚合物熔融和结晶过渡温度和焓的标准测试方法

ISO 11357-2:2020 (塑料) Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height塑料差示扫描量热法（DSC）第2部分:玻璃化转变温度和台阶高度的测定

GB/T 19466.2-2004 (塑料) Plastics-Differential scanning calorimetry(DSC)-Part 2:Determination of glass transition temperature塑料 差示扫描量热法(DSC)第2部分;玻璃化转变温度的测定

IPC-TM-650 2.4.25D：2017（覆铜板或PCB）

ASTM D4419-90(2015)(石油蜡) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) 通过差示扫描量热法测定石油蜡的转变温度的标准试验方法（DSC）

ISO 22768-2020（橡胶） Raw rubber and rubber latex — Determination of the glass transition temperature by differential scanning calorimetry (DSC) 生橡胶和胶乳 差示扫描量热法测定玻璃化转变温度

GB/T 22567-2008 方法A(电气绝缘材料) Electrical insulating materials. Methods of test for determination of the glass transition temperature电气绝缘材料.测定玻璃化转变温度的试验方法

玻璃化转变温度Tg和固化因素(△Tg)测试Glass transition temperature&△Tg(DSC法)

GB/T 4722-2017第6.7.1节 Test methods for rigid copper clad laminates for printed circuits board印制电路用刚性覆铜箔层压板试验方法

熔融热焓(DSC法)Heat of Fusion

ISO 11357-3:2018(塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

GB/T 19466.3-2004 (塑料) Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization塑料 差示扫描量热法(DSC)第3部分;熔融和结晶温度及热焓的测定

ASTM D3418-15(聚合物) Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry通过差示扫描量热法进行聚合物熔融和结晶过渡温度和焓的标准测试方法

ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry用差示扫描量热法测定熔融和结晶焓的标准试验方法

ASTM D4591-17（含氟聚合物） Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry用差示扫描量热法测定含氟聚合物转变温度和热的标准试验方法

热稳定测试（DSC法）Thermal Stability

GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials物质热稳定性的热分析试验方法

熔融温度Melting point Tm(DSC法)

ISO 11357-3:2018(塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

GB/T 19466.3-2004 (塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis用热分析法测定熔化和结晶温度的标准试验方法

ASTM D4591-17（含氟聚合物） Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry用差示扫描量热法测定含氟聚合物转变温度和热的标准试验方法

ASTM D3418-15(聚合物) Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry通过差示扫描量热法进行聚合物熔融和结晶过渡温度和焓的标准测试方法

HG/T 2902-1997 Section 5.8(模塑用聚四氟乙烯树脂) Polytetrafluoroethylene molding powder模塑用聚四氟乙烯树脂

ASTM D7138-16 Method 1（人造纤维） Standard Test Method to Determine Melting Temperature of Synthetic Fibers确定合成纤维熔融温度的标准试验方法

GB/T 17931-2018 Clause 6.7（瓶用聚对苯二甲酸乙二醇醋(PET)树脂） Poly(ethylene terephthalate) (PET) resin for bottles瓶用聚对苯二甲酸乙二酯（PET）树脂

ISO 11357-3:2018 (塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

GB/T 19466.3-2004 (塑料) Plastics-Differential scanning calorimetry(DSC)-Part 3:Determination of temperature and enthalpy of melting and crystallization塑料 差示扫描量热法(DSC)第3部分;熔融和结晶温度及热焓的测定

ASTM D3418-15(聚合物) Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry通过差示扫描量热法进行聚合物熔融和结晶过渡温度和焓的标准测试方法

ASTM E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry用差示扫描量热法测定熔融和结晶焓的标准试验方法

ASTM D4591-17（含氟聚合物） Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry用差示扫描量热法测定含氟聚合物转变温度和热的标准试验方法

结晶温度(DSC法)Crystallization Temperature

ISO 11357-3:2018 (塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

GB/T 19466.3-2004 (塑料) Plastics — Differential scanning calorimetry(DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization塑料 - 差示扫描量热法（DSC） - 第3部分:测定温度和熔融和结晶焓

ASTM D3418-15(聚合物) Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry通过差示扫描量热法进行聚合物熔融和结晶过渡温度和焓的标准测试方法

ASTM E794-06(2018) Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis用热分析法测定熔化和结晶温度的标准试验方法

ASTM D4591-17（含氟聚合物） Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry用差示扫描量热法测定含氟聚合物转变温度和热的标准试验方法

固化度Curing Degree

ASTM E2160-04(2018) Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry用差示扫描量热法测定热反应材料反应热的标准试验方法

HB 7614-1998 复合材料树脂基体固化度的差示扫描量热法(DSC)试验方法

转化率Degree of Conversion

ISO 11357-5:2013 Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion塑料. 差示扫描量热法(DSC). 第5部分: 特征反应曲线温度, 时间, 反应焓和转化度的测定

ISO 18373-1:2007（硬质PVC管） Rigid PVC pipes - Differential scanning calorimetry (DSC) method - Measurement of the processing temperature刚性PVC管.差示扫描量热(DSC)法.处理温度的测量

调制差示量热扫描Temperature modulated differential scanning calorimetry(MDSC)

ASTM E2602-09（2015） Standard Test Methods for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry通过调制温度差示扫描量热法分配玻璃化转变温度的标准测试方法

结晶度Percent Crystallinity

ASTM F2625-10(2016) Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry通过差示扫描量热法测定超高分子量聚乙烯的融合焓值 结晶度和熔点的标准测试方法

热扩散系数及导热系数（闪光法）Thermal diffusivity &Thermal Conductivity（Flash Method）LFA 467

ASTM E1461-13 Standard Test Method for Thermal Diffusivity by the Flash Method闪光法测定热扩散率的标准试验方法

ASTM E2585-09R15 Standard Practice for Thermal Diffusivity by the Flash Method通过闪光法进行热扩散的标准实践

ISO 13826-2013 Metallic and other inorganic coatings. Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method金属及其他无机涂层.通过激光脉冲法测定热喷涂陶瓷涂层的热扩散率

ISO 22007-4-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method塑料.导热性和热散性.激光闪光法

GB/T 22588-2008 Determination of thermal diffusivity or thermal conductivity by the flash method闪光法测量热扩散系数或导热系数

比热容Heat Capacity(Cp)

ISO 11357-4:2014塑料的比热容测试 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity塑料.差示扫描量热法(DSC).比热容的测定

GB/T 19466.4-2016塑料的比热容测试 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity塑料 差示扫描量热法（DSC） 第4部分：比热容的测定

ASTM E1269-11(2018) 比热容测试 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry用差示扫描量热法测定比热容量的标准试验方法

ASTM E2716-09(2014) 调制DSC测比热容的标准测试方法 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry通过正弦调制温度差示扫描量热法测定比热容的标准测试方法

氧化诱导期Oxidative-Induction Time(OIT)

ASTM D3895-19 测试聚烯烃氧化诱导期的试验方法 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry采用差示扫描量热法的聚烯烃氧化诱导时间的标准试验方法

ISO 11357.6:2018塑料的氧化诱导期测试 Plastics — Differential scanning calorimetry (DSC) — Part 6:Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) 塑料 - 差示扫描量热法（Dsc） - 第6部分:氧化诱导时间（等温线）和氧化诱导温度（动态监测）的测定

GB/T 19466.6-2009塑料的氧化诱导期测试 Plastics. Differential scanning calorimetry(DSC).Part 6:Determination of oxidation induction time(isothermal OIT) and oxidation induction temperature (dynamic OIT) 塑料.差示扫描量热法(DSC)第6部分:氧化诱导时间(等温OIT)和氧化诱导温度(动态OIT)的测定

EN 728-1997塑料管道和管道系统聚烯烃管和 配件：氧化诱导时间的测定 Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time塑料管和管道系统.聚烯烃管和配件.氧化诱导时间的测定

ASTM E1858-08(2015) ε1方法A DSC测试烃类氧化诱导期的试验方法 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry通过差示扫描量热法测定碳氢化合物的氧化诱导时间的标准测试方法

GB/T 17391-1998聚乙烯管材及管件热稳定性试验方法 Test method for thermal stability of polyethylene pipes and fittings聚乙烯管材与管件热稳定性试验方法

碳黑含量Carbon black content

GB/T 2951.41-2008（TGA法） Common test method for insulating and sheathing materials of electric and optical cables. Part 41: Methods specific to polyethylene and polypropylene compounds. Resistance to environmental stress cracking. Measurement of the melt flow index. Carbon black and/o电缆和光缆绝缘和护套材料通用试验方法.第41部分:聚乙烯和聚丙烯混合料专用试验方法.耐环境应力开裂试验.熔体指数测量方法.直接燃烧法测量聚乙烯中碳黑和(或)矿物质填料含量.热重分析法(TGA)测量碳黑含量.显微镜法评估聚乙烯中碳黑分散度

BS EN 60811-605:2012（TGA法）Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of carbon black and/or mineral filler in polyethylene compounds电缆和光缆. 非金属材料的试验方法. 物理试验. 聚乙烯化合物内炭黑和/或矿物填料的测量

锌含量Metallic Zinc Content

HG/T 3668-2009第5.7.3节 Zinc rich primer富锌底漆

ASTM D6580-17锌粉颜料及富锌漆干膜中金属锌含量测定的标准方法 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings锌粉颜料和富锌涂料固化膜中金属锌含量测定的标准试验方法