拉伸强度Tensile Strength

CNS 3553-2016 Method of Test for Tension of Vulcanized Rubber硫化橡胶拉伸试验法

JIS K6251:2017/Cor.1:2017 (取代JIS K6301:1995) Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶拉伸应力应变性能的测定

DIN 53504:2017 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test橡胶试验.在抗拉伸试验中断裂抗拉强度、屈服拉伸应力、断裂延伸率和应力值的测定

HG/T 3849-2008(R2017) (取代GB/T 1701-2001) Ebonite.Determination of tensile strength and elongation at break硬质橡胶.拉伸强度和拉断伸长率的测定

ASTM D2671-13 (电气用热收缩管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use电气用热缩管的标准试验方法

ASTM D412-16 Method A、B Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension硫化橡胶和热塑性弹性体的标准试验方法——张力

ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶.拉伸应力-应变性能的测定

GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶.拉伸应力应变性能的测定

GB/T 30680-2014 第5.3.2节 Fluorine rubber sheet general technical conditions氟橡胶板通用技术条件

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation 氟橡胶 通用规范和评价方法

AS 1683.11-2001 (橡胶)Methods of test for elastomers - Tension testing of vulcanized or thermoplastic rubber人造橡胶的试验方法.硫化或热塑性橡胶的拉伸试验

伸长率Elongation

ASTM D2671-13 (电气用热收缩管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use电气用热缩管的标准试验方法

ASTM D412-16 Method A、B Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension硫化橡胶和热塑性弹性体的标准试验方法-张力

ISO 37:2017 Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶.拉伸应力-应变性能的测定

GB/T 528-2009 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶.拉伸应力应变性能的测定

CNS 3553-2016 Method of Test for Tension of Vulcanized Rubber硫化橡胶拉伸试验法

JIS K6251:2017/Cor.1:2017 (取代JIS K6301:1995)Rubber, vulcanized or thermoplastic-Determination of tensile stress-strain properties硫化橡胶或热塑性橡胶拉伸应力应变性能的测定

DIN 53504:2017 Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test橡胶试验.在抗拉伸试验中断裂抗拉强度、屈服拉伸应力、断裂延伸率和应力值的测定

HG/T 3849-2008(R2017) (取代GB/T 1701-2001)Ebonite.Determination of tensile strength and elongation at break硬质橡胶.拉伸强度和拉断伸长率的测定

AS 1683.11-2001 (橡胶)Methods of test for elastomers - Tension testing of vulcanized or thermoplastic rubber人造橡胶的试验方法.硫化或热塑性橡胶的拉伸试验

压缩应力-应变性能Compression Stress-Strain

ISO 7743:2017 Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties硫化橡胶或热塑性橡胶 - 压缩应力-应变特性的测定

GB/T 7757-2009 Rubber,vulcanized or thermoplastic-Determination of compression stress-strain properties硫化橡胶或热塑性橡胶.压缩应力应变性能的测定

JIS K6254: 2017 Section 5 Rubber, vulcanized or thermoplastic-Determination of stress-strain properties硫化橡胶或热塑性橡胶应力应变性能的测定

压缩性能Compression properties

ASTM D575-91(2018) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades钢筋、碳、商户质量、M 级的标准规范

压缩应力松弛Stress Relaxation in Compression

ISO 3384-1:2011 Method A Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Part 1: Testing at constant temperature (ISO 3384-1:2011 + Amd.1:2013) 硫化橡胶或热塑性橡胶-压缩应力松弛的测定-第1部分：恒温测试

GB/T 1685-2008 方法A Rubber,vulcanized or thermoplastic.Determination of stress relaxation in compression at ambient and at elevated temperatures硫化橡胶或热塑性橡胶.在常温和高温下压缩应力松弛的测定

ASTM D6147-97(2014) Method A Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression硫化橡胶和热塑性弹性体的试验方法-压缩力衰减(应力松弛)的测定

拉伸永久变形Tensile set

ISO 2285:2019 Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load 硫化橡胶或热塑性橡胶-恒定伸长率下张力变形和恒定拉伸载荷下张力变形、伸长率和蠕变的测定

蠕变测试Creeping test

GB/T 19242-2003 (硫化橡胶)Rubber,vulcanized--Determination of creep in compression or shear硫化橡胶 在压缩或剪切状态下蠕变的测定

回弹性Rebound Resilience

ISO 4662:2017 Pendulum Method Rubber, vulcanized or thermoplastic - Determination of rebound resilience硫化橡胶或热塑性橡胶。回弹性的测定

GB/T 1681-2009 Rubber.Determination of rebound resilience of vulcanizates硫化橡胶回弹性的测定

DIN 53512:2000 Determination the rebound resilience of rubber using the Schob pendulum用 Schob 摆锤测定橡胶的回弹性

JIS K6255:2013 Rubber, vulcanized or thermoplastic - Determination of rebound resilience硫化橡胶或热塑性橡胶。回弹性的测定

撕裂强度Tearing strength

GB/T 529-2008 Rubber,vulcanized or thermoplastic.Determination of tear strength(Trouser,angle and crescent test pieces)硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样)

JIS K6252-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces硫化橡胶或热塑性橡胶-撕裂强度的测定-第1部分：裤子、角钢和月牙试件

JIS K6252-2:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength

ISO 34-2:2015 (Delft specimen) Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces硫化或热塑性橡胶-撕裂强度的测定-第2部分：小(德尔夫特)试样

ASTM D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers常规硫化橡胶和热塑性弹性体撕裂强度的标准试验方法

ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces 硫化橡胶或热塑性橡胶-撕裂强度的测定-第1部分：裤子、角钢和新月形试样

GB/T 12829-2006 (德尔夫特试样)Rubber, vulcanized or thermoplastic. Determination of tear strength of small test pieces (Delft test pieces)硫化橡胶或热塑性橡胶小试样 (德尔夫特试样)撕裂强度的测定

抗剪切强度Shearing strenth

GB/T1700-2001 (作废)(硬质橡胶)Ebonite-Determination of shearing strength硫化橡胶或热塑性橡胶-撕裂强度的测定

压缩永久变形Compression Set

ASTM D395-18 Method A Standard Test Methods for Rubber Property—Compression Set橡胶性能的标准测试方法-压缩永久变形

ASTM D395-18 Method B Standard Test Methods for Rubber Property—Compression Set橡胶性能的标准测试方法-压缩永久变形

ISO 815-1:2019 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡胶或热塑性橡胶 - 环境温度、高温或低温下压缩永久变形的测定

JIS K6262:2013 Section 6 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures硫化橡胶或热塑性橡胶 - 环境温度、高温或低温下压缩永久变形的测定

DIN ISO 815-1: 2016 (取代DIN 53517:1987)Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡胶或热塑性橡胶 - 环境温度、高温或低温下压缩永久变形的测定

JIS K6403:2018 Classification system for vulcanized rubber for automotive applications汽车用硫化橡胶分类系统

GB/T 7759.1-2015 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 1:At ambient or elevated temperatures 硫化橡胶或热塑性橡胶 压缩永久变形的测定 第1部分:在常温及高温条件下

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation

ASTM D1414-15 Section 10(橡胶O型圈)(IDT ASTM D395-2018 Method B)Standard Test Methods for Rubber O-Rings橡胶 O 型圈的标准测试方法

GB/T 1683 -2018 Acoustics - Preferred reference values for acoustical and vibratory levels声学-声学和振动水平的首选参考值

HG/T 2876-2009(R2017) (橡塑鞋微孔材料)Cellular material for rubber-plastics shoes.Determination of compression set本标准规定了橡塑鞋微孔材料压缩变形的试验方法。 本标准适用于橡塑鞋微孔材料压缩变形的测定。

低温压缩永久变形Compression Set at Low Temperature

ISO 815-2:2019 Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures硫化橡胶或热塑性橡胶 - 环境温度、高温或低温下压缩永久变形的测定

GB/T 7759.2-2014 Rubber, vulcanized or thermoplastic.Determination of compression set.Part 2:At low temperatures硫化橡胶或热塑性橡胶 压缩永久变形的测定 第2部分:在低温条件下

JIS K6262:2013 Section 7 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures硫化橡胶或热塑性橡胶-环境温度、高温或低温下压缩永久变形的测定

硬度(ASKER C型)Hardness(ASKER C)

ISO 48-4:2018 (取代ISO 7619-1:2010 )Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或热塑性橡胶-硬度测定-第4部分：硬度计法的压痕硬度(邵尔硬度)

JIS K7312:1996 (热固性聚氨酯弹性体) Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers热固性聚氨酯弹性体模制品的物理试验方法

邵氏A型硬度Shore Hardness Type A

GB/T 531.1-2008 Rubber,vulcanized or thermoplastic.Determination of indentation hardness.Part 1:Duromerer method( Shore hardness)硫化橡胶或热塑性橡胶.压入硬度试验方法.第1部分:邵氏硬度计法(邵尔硬度)

JIS K7312:1996 (热固性聚氨酯弹性体) Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers热固性聚氨酯弹性体模制品的物理试验方法

JIS K6253-3:2012 Rubber, vulcanized or thermoplastic-Determination of hardness- Part 3: Durometer method硫化橡胶或热塑性橡胶硬度的测定第3部分：硬度计法

ISO 868:2003 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness)塑料和硬橡胶-用硬度计测定压痕硬度(邵尔硬度)

ASTM D2240-15 Standard Test Method for Rubber Property-Durometer Hardness 橡胶性能的标准试验方法-硬度计的硬度

ISO 48-4:2018 (取代ISO 7619-1:2010 ) Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或热塑性橡胶-硬度测定-第4部分：硬度计法的压痕硬度(邵尔硬度)

GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)塑料和硬橡胶.使用硬度计测定压痕硬度(邵氏硬度)

DIN ISO 7619-1:2012 (取代DIN 53505:2000) Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) (ISO 7619-1:2010)硫化或热塑性橡胶-压痕硬度的测定-第1部分：硬度计法(肖氏硬度)

AS 1683.15.2-1990 (橡胶) Methods of test for elastomers - Durometer hardness人造橡胶的测试方法 硬度计法

国际橡胶硬度International Rubber Hardness Degrees(IRHD)

ASTM D1415-18 Standard Test Method for Rubber Property—International Hardness橡胶性能的标准试验方法-国际硬度

ISO 48-2:2018 (取代ISO 7619-1:2010 )Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或热塑性橡胶-硬度测定-第4部分：硬度计法的压痕硬度(邵尔硬度)

GB/T 6031-2017 Rubber, vulcanized or thermoplastic—Determination of hardness (hardness between 10 IRHD and 100 IRHD)硫化橡胶或热塑性橡胶 硬度的测定(10IRHD~100IRHD)

JIS K6253-2:2012 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD)硫化橡胶或热塑性橡胶-硬度测定-第2部分：IRHD方法(硬度在 10 IRHD 和 100 IRHD 之间)

BS ISO 48:2010 (作废) (取代 BS 903-A26:1995)Rubber, vulcanized or thermoplastic - Determination of hardness - Part 4: Indentation hardness by durometer method (Shore hardness)硫化或热塑性橡胶-硬度测定-第4部分：硬度计法的压痕硬度(邵尔硬度)

耐化学溶剂Resistance to liquids

ASTM D471-16a (浸泡法) Standard Test Method for Rubber Property-Effect of Liquids橡胶性能的标准试验方法-液体的影响

ISO 1817:2015 (浸泡法) Rubber, vulcanized or thermoplastic - Determination of the effect of liquids硫化橡胶或热塑性橡胶-液体影响的测定

GB/T 30308-2013 Standard Practices for Sampling for Particles in Aerospace Fluids and Components航空流体和部件中颗粒取样的标准做法

GB/T 30680-2014 第5.3.4节Fluorine rubber sheet general technical conditions氟橡胶板通用技术条件

GB/T 1690-2010 (浸泡法)Rubber,vulcanized or thermoplastic.Determination of the effect of liquids硫化橡胶或热塑性橡胶 耐液体试验方法

热空气老化(试管法)Deterioration by Heating in Air (Test Tube Enclosure)

ASTM D865-11(2018) Standard Test Method for Rubber Deterioration by Heating in Air (Test Tube Enclosure)空气中加热导致橡胶劣化的标准试验方法(试管外壳)

水解稳定性Hydrolytic Stability

ISO 4646:1989 (多试样法)Rubber- or Plastics-Coated Fabrics - Low-Temperature Impact Test橡胶或塑料涂层织物-低温冲击试验

D42 1115:1997 (无脆性极限温度) Specification for Coal-Tar Pitch for Roofing, Damp-Proofing and Waterproof IG Level屋顶、防潮和防水等级用煤焦油沥青规范

ASTM D3137-81 (2018)低温脆化温度Brittleness temperature. Standard Test Method for Rubber Property—Hydrolytic Stability橡胶性能的标准试验方法——水解稳定性

ASTM D2137-11(2018) (多试样法)Method A、C、D. Standard Test Methods for Rubber Property Brittleness Point of Flexible Polymers and Coated Fabrics柔性聚合物和涂层织物的橡胶性能脆点的标准试验方法

ISO 812:2017 (多试样法)Procedure A、B、C. Rubber, vulcanized or thermoplastic - Determination of low-temperature brittleness硫化橡胶或热塑性橡胶-低温脆性的测定

GB/T 15256-2014 (多试样法)程序A、B、C. Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness(multiple test piece method)硫化橡胶或热塑性橡胶 低温脆性的测定(多试样法)

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation 氟橡胶 通用规范和评价方法

GB/T 1682-2014 (单试样法)Rubber,vulcanized.Determination of low-temperature brittleness.Single test piece method硫化橡胶 低温脆性的测定 单试样法

JIS K6261:2006 clause 5(多试样法) Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Properties硫化橡胶或热塑性橡胶 - 低温性能的测定

橡胶低温回缩(TR测试)Low-temperature Retraction (TR Test)

ASTM D1329-16 Standard Test Method for Evaluating Rubber Propert-Retraction at Lower Temperatures (TR Test)评价橡胶性能的标准试验方法-低温回缩(TR试验)

ISO 2921:2019 Rubber, vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure (TR test)硫化橡胶-低温特性的测定温度回缩程序(TR 试验)

GB/T 7758-2002 Rubber,vulcanized-Determination of low-temperature characteristics-Temperature-retraction procedure (TR test)硫化橡胶 低温性能的测定 温度回缩法(TR试验)

JIS K6261:2006 Section 7 Rubber, Vulcanized or Thermoplastic - Determination of Low Temperature Properties硫化橡胶或热塑性橡胶 - 低温性能的测定

表面污染性Staining of surfaces

ASTM D925-14 Method A Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)橡胶性能的标准测试方法-表面染色(接触、迁移和扩散)硫化橡胶或热塑性橡胶-与有机材料接触的染色试验方法

ISO 3865:2020 Method A Rubber, vulcanized or thermoplastic -Methods of test for staining in contact with organic material硫化橡胶或热塑性橡胶-与有机材料接触的染色试验方法

GB/T 19243-2003 方法 A1 Rubber,vulcanized or thermoplastic--Methods of test for staining in contact with organic material硫化橡胶或热塑性橡胶与有机物接触污染的试验方法

DIN磨损DIN abrasion

DIN ISO 4649:2014 (取代DIN 53516:1987) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device硫化橡胶或热塑性橡胶 - 使用旋转圆柱形滚筒装置测定耐磨性

ISO 4649:2017 Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device 硫化橡胶或热塑性橡胶 - 使用旋转圆柱形滚筒装置测定耐磨性

GB/T 9867-2008 Rubber,vulcanized or thermoplastic.Determination of abrasion resistance using a rotating cylindrical drum device硫化橡胶或热塑性橡胶耐磨性能的测定(旋转辊筒式磨耗机法)

SATRA PM174:1994 Abrasion resistance-rotating drum method耐磨性-转鼓法

BS ISO 4649:2017 (取代BS 903-A9:1988 ) Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device硫化橡胶或热塑性橡胶 - 使用旋转圆柱形滚筒装置测定耐磨性

EN 13597:2003 Section 7.2.5 (IDT ISO 4649-2017) Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs铁路应用-橡胶悬挂部件-用于气动悬挂弹簧的橡胶膜片

ASTM D5963-04 (2015)Method A、Method B(橡胶)Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)橡胶性能的标准试验方法-耐磨性(转鼓研磨机)

阿克隆磨耗Akron abrasion test

GB/T 1689-2014 Rubber vulcanized.Determination of abrasion resistance (Akron machine)硫化橡胶 耐磨性能的测定(用阿克隆磨耗试验机)

尺寸测试Measurement of dimensions

ASTM D3767−03 (2014)(橡胶) Standard Practice for Rubber—Measurement of Dimensions橡胶标准规程——尺寸测量

热充电Heat Shock

ASTM D2671-13 C26-30(电气用热收缩管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use电气用热缩管的标准试验方法

塑性值/复原值Plasticty Number/Recovery Number

GB/T 12828-2006 Rubber, raw and unvalcanized compounded Determination of plasticity number and recovery number Parallel plate method生胶和未硫化混炼胶塑性值和复原值的测定平行板法

ISO 7323:2006 Rubber, raw and unvulcanized compounded Determination of plasticity number and recovery number Parallel-plate method橡胶，生的和未硫化的混炼胶 塑性数和恢复数的测定 平行板法

密度Density

ASTM D297-15 (Hydrostatic Method) Standard Test Methods for Rubber Products-Chemical Analysis橡胶制品的标准试验方法-化学分析

ISO 2781:2018 (Method A) Rubber, vulcanized or thermoplastic - Determination of density硫化橡胶或热塑性橡胶.密度的测定

GB/T 533-2008 方法A Rubber,vulcanized or thermoplastic.Determination of density硫化橡胶或热塑性橡胶.密度的测定

GB/T 30308-2013 Fluoroelastomers.General specification and procedure of evaluation氟橡胶 通用规范和评价方法

CNS 5341-2007 方法Ⅰ Determination of density for vulcanized or thermoplastic rubber硫化橡胶或热塑性橡胶密度测定法

JIS K6268:1998 (Method A) Rubber, Vulcanized - Determination of Density

硫化橡胶 - 密度测定

DIN 28090-2:1995 Section 8(垫圈材料) Static gaskets for flange connections - Gaskets made from sheets - Part 2: Special test procedures for quality assurance法兰连接件的静态密封垫.板材制密封垫.第2部分:质量保证的特殊试验程序

视密度Apparent density

HG/T 2872-2009(R2017)(橡塑鞋微孔材料) Cellular material for rubber-plastics shoes.Determination of apparent density橡塑鞋微孔材料视密度试验方法

90º剥离试验90°Stripping Test

ASTM D429-14 Method B Standard Test Methods for Rubber Property-Adhesion to Rigid Substrates橡胶性能的标准试验方法-对刚性基材的附着力

GB/T 7760-2003 Rubber,vulcanized or thermoplastic--Determination of adhesion to a rigid substrate--90 degrees peel method硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法

各层间粘结强度Adhesion between components

ISO 8033: 2016 (压缩空气用织物增强橡胶软管) Rubber and plastics hoses - Determination of adhesion between components橡胶和塑料软管。部件间附着力的测定

GB/T 14905-2009 (压缩空气用织物增强橡胶软管) Rubber and plastics hoses.Determination of adhesion between components橡胶和塑料软管.各层间粘合强度的测定

粘接强度Adhesion strength

ASTM D413−98 (2017)Machine Method(橡胶) Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate橡胶性能的标准试验方法-对柔性基材的附着力

抗粘性Blocking resistance

ISO 5978: 1990 (橡胶或塑料涂层织物)Rubber- or Plastics-Coated Fabrics - Determination of Blocking Resistance橡胶或塑料涂层织物，抗粘连性的测定

耐磨Abrasion resistanceEN

ISO 6945: 1996 (橡胶软管)(废止) Rubber hoses－Determination of abrasion resistance of the outer cover橡胶软管外罩耐磨性的测定

90º剥离试验90 stripping test

ISO 813:2019 Rubber, vulcanized or thermoplastic-Determination of adhesion to a rigid substrate -90° peel method硫化橡胶或热塑性橡胶-对刚性基材的附着力测定-90°剥离法

拉伸剪切强度Tensile shear strength

GB/T 13936-2014 Rubber, vulcanized.Method for determination of strength properties of adhesive to metal in shear by tension loading硫化橡胶 与金属粘接拉伸剪切强度测定方法

低温柔韧性Low-Temperature Properties

ASTM D2671-13 C36-43方法A/B/C(电气用热收缩管)Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use电气用热缩管的标准试验方法

低温曲挠实验Subambient temperature flexibility tests

GB/T 5565.2-2017 (橡胶软管)Rubber and plastics hoses and tubing—Measurement of flexibility and stiffness—Part 2: Bending tests at sub-ambient temperatures橡胶和塑料软管和管材柔韧性和刚度的测量第2部分：亚环境温度下的弯曲试验

EN ISO 10619-2:2018 方法B(橡胶软管)(取代EN ISO 4672: 1999) Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures橡胶和塑料软管和管材，柔韧性和刚度的测量，第2部分：低于环境温度的弯曲试验

溶胀指数Swellling index

HG 3870-2008 (R2017)(硫化橡胶) Rubber, vulcanized.Determination method of swelling index硫化橡胶溶胀指数测定方法