巴克霍尔兹压痕试验Buchholz indentation test

ISO 2815: 2003 Paints and varnishes - Buchholz indentation test 色漆和清漆.布考耳兹(Buchholz)压痕试验

GB/T 9275-2008 Paint and varnishes.Buchholz indentation test色漆和清漆.巴克霍尔兹压痕试验

DIN EN ISO 2815: 2003 (取代DIN 53153-1997) Paints and varnishes - Buchholz indentation test 色漆和清漆.布考耳兹(Buchholz)压痕试验

铅笔硬度Pencil hardness

BS EN ISO 15184:2020 (取代BS 3900-E19:1999) Paints and varnishes ― Determination of film hardness by pencil test颜料和清漆.使用铅笔试验测定薄膜硬度

GB/T 6739-2006 Paints and varnishes-Determination of film hardness by pencil test色漆和清漆.铅笔法测定漆膜硬度

ASTM D3363-20 Standard Test Method for Film Hardness by Pencil Test铅笔实验测定漆膜硬度的标准试验方法

ISO 15184:2020 Paints and varnishes ― Determination of film hardness by pencil test颜料和清漆.使用铅笔试验测定薄膜硬度

T/ZZB 0427-2018 第5.4.9节 水性紫外光固化涂料团体标准

JIS K 5600-5-4:1999 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 5: Colorimetry (Measurement) (Erratum 1)涂料试验方法.第4部分:薄膜的外观特性.第5节:比色法(测量)(勘误1)

漆膜耐冲击性Impact strength

ASTM D2794-93 (2019) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)有机涂层抗快速形变(冲击)作用的标准试验方法

ISO 6272-1:2011 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter涂料和清漆.快速变形(抗冲击)试验.第1部分:大面积压头的落锤试验

GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter色漆和清漆 快速变形(耐冲击性)试验 第1部分:落锤试验(大面积冲头)

ISO 6272-2:2011 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter涂料和清漆.快速毁坏(抗冲击)试验.第2部分:小面积砸痕的落锤试验

GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter色漆和清漆 快速变形(耐冲击性)试验 第2部分:落锤试验(小面积冲头)

GB/T 1732-1993 Determination of impact resistance of film漆膜耐冲击性测定法

JIS K5600-5-3:1999 Section 6 (取代JIS K5400 Clause 8.3.2) Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test (Erratum 1)涂料试验方法.第5部分:薄膜的机械特性.第3节:落锤试验(勘误1)

TABER旋转耐磨性Taber Rotary Abrasion

ASTM D4060-19 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser采用泰伯磨耗试验仪的有机涂层耐磨性的标准试验方法

ASTM D6037-18 (高光泽涂层)Method A Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings高光泽度覆层耐干磨损坏的标准试验方法

ASTM D3884-09 (2017) (纺织品涂层) Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)纺织品耐磨性的标准指南(旋转平台、双头法)

ASTM C501-84 (2015) (瓷砖) Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser用泰伯磨损机测定未上釉瓷砖的相对耐磨力的标准试验方法

EN 438-2: 2016+A1:2018 Clause 11 (木塑) High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第2部分:性能测定.

GB/T 24508-2009 6.5.15 (木塑地板) Wood-plastic composite flooring木塑地板

ASTM C1353/C1353M-15 (石材) Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser采用旋转台式磨蚀机的人行道用石材耐磨损性的标准试验方法

ISO 5470-1: 2016 (充气舱涂层织物) Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader涂覆橡胶或塑料的织物.耐磨性的测定.第1部分:泰伯磨损检验器

GB/T 30314-2013 (充气舱涂层织物) Rubber-or plastics-coated fabrics.Determination of abrasion resistance.Taber abrader橡胶或塑料涂覆织物 耐磨性的测定 泰伯法

ISO 15372:2000 Clause 6.2.15 (充气舱涂层织物) Inflatable rescue boats－Coated fabrics for inflatable chambers船舶用充气救生船.充气船舱用涂层织物

ASTM F1478-17 (纸制品) Standard Test Method for Determination of Abrasion Resistance of Images Produced from Copiers and Printers (Taber Method)测定复印机和打印机印的制图像耐磨性的标准试验方法(泰伯法)

GB/T 1768-2006 Paints and varnishes Determination of resistance to abrasion Rotating abrasive rubber wheel method色漆和清漆 耐磨性的测定 旋转橡胶砂轮法

ISO 7784-1:2016 Paints and varnishes - Determination of resistance to abrasion - Part 1: Method with abrasive-paper covered wheels and rotating test specimen涂料和清漆.耐磨性的测定.第1部分:使用研磨纸覆盖轮和旋转试样的方法

ISO 7784-2:2016 Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen涂料和清漆.耐磨性的测定.第2部分:使用耐磨橡胶轮和旋转试样的方法

ASTM D7255-20 (皮革) Standard Test Method for Abrasion Resistance of Leather 40;Rotary Platform, Abraser Method41皮革耐磨性;旋转平台, 磨耗法41的标准试验方法

ASTM D3389-16 (织物的橡胶或者塑料涂层) Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)涂层织物的耐磨性 (旋转平台式研磨机) 的标准试验方法

GB/T 18102-2007 6.3.11节 (浸渍纸压木质地板) Laminate flooring浸渍纸层压木质地板

BS EN 15185-2011 Furniture. Assessment of the surface resistance to abrasion家具.表面耐摩擦性评定

线性磨耗linear abrasion

ISO 105 X12: 2016 (织物) Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing纺织品.色牢度试验.第X12部分:耐摩擦的颜色牢度

GB/T 3920-2008 (织物) Textiles.Tests for colour fastness.Colour fastness to rubbing纺织品.色牢度试验.耐摩擦色牢度

AATCC 8-2016 (织物) Colorfastness to Crocking: AATCC Crockmeter Method耐摩擦色牢度.AATCC摩擦器法

ISO 20433:2012 Leather. Tests for colour fastness. Method for determination of colour fastness to rubbing皮革. 色牢度试验. 耐摩擦色牢度的测定方法

JIS L0849:2013 (织物) Test methods for colour fastness to rubbing耐摩擦色牢度的试验方法

SAE J861-2012 (汽车内织物) Method of Testing Resistance to Crocking of Organic Trim Materials对有机饰件材料的耐摩擦性测试方法

ISO 11640:2018 (皮革) Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing皮革 -色牢度试验 -耐反复摩擦色牢度

QB/T 2537-2001 (2017) (皮革) 皮革.色牢度试验.往复式摩擦色牢度

耐磨Resistance to Abrasion

SAE J948-2017 (皮革) Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth测定汽车贴身布、乙烯基和皮革的耐磨性和汽车贴身布的抗拉丝性的试验方法

TABER线性磨耗TABER Linear Abrasion

GMW 14125-2019 线性磨损试验

SAE J2027-2013 Section 5.2.3 (收缩管) Standard for Protective Covers for Gasoline Fuel Line Tubing汽油燃料管线保护罩标准

落砂磨耗Falling sand abrasion

ASTM D968-17 Method A，method B Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive用落沙磨蚀法测定有机覆层耐磨性的标准试验方法

GB/T 5237.4-2017 第5.4.10节 Wrought aluminium alloys extruded profiles for architecture—Part 4: Powder coating profiles铝合金建筑型材 第4部分：喷粉型材

GB/T 8013.1-2018 第6.7.2节 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings铝及铝合金阳极氧化膜与有机聚合物膜 第1部分：阳极氧化膜

GB/T 12967.7-2010 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 7: Measurement of abrasion resistance of anodic oxidation coatings by sand falling test apparatus铝及铝合金阳极氧化膜检测方法.第7部分：用落砂试验仪测定阳极氧化膜的耐磨性

GB/T 23988-2009 Determination for abrasion resistance of coatings by falling abrasive涂料耐磨性测定.落砂法

GMW 15487-2019 Determining the Resistance to Abrasion of Organic Coating有机涂层耐磨性的测定

GMW14671-2016 Section 3.9.4 Organic Coating Performance for Underhood and Underbody Components发动机罩下和车身底部部件的有机涂层性能

Q/CR 546.6-2016 附录A 铁路工程土工合成材料 第第 6 部分

RCA磨耗RCA abrasion

ASTM F3152-16 (取代ASTM F2357-10) Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium使用干或者湿磨介质测定基材上油墨和涂料耐磨性的标准试验方法

漆膜厚度Coating thickness

ISO 2178:2016 (磁性基材、非磁性涂层) Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method磁性基体的非磁性覆层.覆层厚度的测量.磁性法

ASTM D7091-13 (铁基非磁性、非铁基非磁性) (取代ASTM D1400-94 & ASTM D1186-01 Method B (磁通法)) Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals对应用于黑色金属的非磁性涂层以及应用于非黑色金属的非磁性, 不导电涂层的干膜厚度进行无损测量的标准实施规程

ISO 2808:2019 Method 7C和7D Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

GB/T 13452.2-2008 方法7C和7D Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

GB/T 4956-2003 (磁性基材、非磁性涂层) Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method磁性基体的非磁性覆层.覆层厚度的测量.磁性法

ISO 2360:2017 (涡流法) Non-conductive coatings on non-magnetic electrically conductive base metals. Measurement of coating thickness. Amplitude-sensitive eddy-current method非磁性导电基体上非导体覆盖层.镀层厚度的测量.振幅灵敏性涡流法

GB/T 4957-2003 (涡流法) Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current非磁性基体金属上非导电覆盖层 覆盖层厚度测量 涡流法

ISO 2808:2019 方法 6B Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

GB/T 13452.2-2008 方法 6B Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

AS 1580.408.1-2004

ASTM D4138-07a (2013) (破坏法) Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means用破坏性横截面方法测量保护涂层系统干膜厚度的标准规程

ASTM D6132-13 (2017) (超声波法,适用于木漆、塑料涂层) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage采用超声波涂层测厚仪对应用有机涂层的干膜厚度进行无损测量的标准试验方法

ISO 2808:2019 方法10 (超声波法,适用于木漆、塑料涂层) Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

GB/T 13452.2-2008 方法10 (超声波法,适用于木漆、塑料涂层) Paints and varnishes－Determination of film thickness涂料和清漆.漆膜厚度的测定

漆膜附着力 (划格法)Adhesion

ASTM D3359-17 Method A、B Standard Test Methods for Rating Adhesion by Tape Test通过胶带测试评定附着力的标准测试方法

ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems ㅡ Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ㅡ Part 2: Cross-cut testing and X-cut testing防护涂料系统对钢结构的腐蚀防护.涂层粘附/粘聚(断裂强度)的评估和验收标准.第2部分:横切测试和X切割测试

ISO 2409:2020 Paints and varnishes - Cross-cut test 色漆和清漆. 横切试验

GB/T 9286-1998 Paints and varnishes--Cross cut test for films色漆和清漆 漆膜的划格试验

T/ZZB 0427-2018 第5.4.8节 水性紫外光固化涂料团体标准

AS/NZS 1580.408.4:2004 Paints and Related Materials - Methods of Test Method 408.4: Adhesion (Cross-Cut)油漆和相关材料 - 测试方法 408.4 的方法：附着力（交叉切割）

JIS K 5600-5-6: 1999 (涂层件) (取代JIS K5400-1990 Section 8.5.2) Testing methods for paints -- Part 5: Mechanical property of film -- Section 6: Adhesion test (Cross-cut test)涂料试验方法:第5部分:膜的机械性能.第6节:粘合试验(横切试验)

漆膜附着力 (划叉法)Adhesion

JIS K 5400:1990 Section 8.5.3 (涂层件) (已废止) Testing methods for paints涂料的一般试验方法

漆膜附着力 (画圈法)Adhesion

GB/T 1720-1979 (89) Method of test for adhesion of paint films漆膜附着力测定法

漆膜附着力 (拉开法)Adhesion

ASTM D4541-17 Method C、E Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers利用便携式粘性试验机测定涂层拉脱强度的标准试验方法

ISO 4624:2016 Clause 8.4.2 (Method B)

GB/T 5210-2006 条款9.4.2 Paints and varnishes. Pull-off test for adhesion色漆和清漆 拉开法附着力试验

漆膜耐柔韧性Flexibility

ISO 1519:2011 Paints and varnishes－Bend test(cylindrical mandrel)涂料和清漆.弯曲试验(圆心轴)

GB/T 20633.2-2011 第7.5节 Coatings for loaded printed wire boards (conformal coatings).Part 2：Methods of test承载印制电路板用涂料(敷形涂料).第2部分：试验方法

GB/T 1731-93 Determination of flexibility of films漆膜柔韧性测定法

ASTM D522/D522M-17 Method A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings附着有机涂层芯轴弯曲试验的标准试验方法

GB/T 6742-2007 Paints and varnishes.Bend test(cylindrical mandrel)色漆和清漆 弯曲试验(圆柱轴)

ISO 6860:2006 Paints and varnishes－Bend test(conical mandrel)涂料和清漆.弯曲试验(锥体心轴)

GB/T 11185-2009 Paints and varnishes.Bend test(conical mandrel)色漆和清漆.弯曲试验(锥形轴)

ASTM D4145-10 (2018) (T bend) Standard Test Method for Coating Flexibility of Prepainted Sheet预涂板涂层柔韧性的标准试验方法

耐刮擦测试Scratch test

ISO 1518-1:2019 Paints and varnishes－Determination of scratch resistance－ Part 1：Constant-loading method涂料和清漆.抓电阻测量.第1部分:一定荷重方法

GB/T 9279.1-2015 Paints and varnishes.Determination of scratch resistance.Part 1: Constant-loading method色漆和清漆 耐划痕性的测定 第1部分:负荷恒定法

EN 438-2:2016+A1:2018 Clause 25 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of propertie装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第2部分:性能测定

BS EN 15186:2012 Furniture. Assessment of the surface resistance to scratching家具.表面耐划痕评定

耐磨Mar resistance

ISO 12137:2011 (有机涂层) Paints and varnishes－Determination of mar resistance涂料和清漆.耐损性测定

JIS K5600-5-5:1999 (涂层件) Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 5: Scratch Hardness (Stylus Method)油漆测试方法 - 第 5 部分：薄膜的机械性能 - 第 5 部分：划痕硬度（触针法）

ASTM D5178-16 (有机涂层) Standard Test Method for Mar Resistance of Organic Coatings有机涂层耐擦伤性的标准试验方法

ASTM D2197-16 (有机涂层) Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion刮板式粘合试验器测定有机涂层粘合性的标准试验方法

ASTM D6279-15 (涂层) Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings 高光泽度覆层耐磨擦损坏的标准试验方法

植绒耐磨Flocked Abrasion Resistance

PV 3932:2006 Textiles - Woven Fabrics - Measurement of Width of Pieces纺织品 - 机织物 - 幅宽的测量

PV 3966:2018 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes封闭管道中流体流量的测量 — 使用皮托管静力管的速度面积法

ABREX® 多功能手指磨耗仪manual abrasion test

GB/T 2423.53-2005 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands 电工电子产品环境试验 第2部分;试验方法 试验Xb:由手的磨擦造成标记和印刷文字的磨损

IEC 60068-2-70:1995 Environmental Testing－Part 2：Tests Xb：abrasion of markings and letterings caused by rubbing of fingers and hands基本环境试验规程.第2部分:试验.第70节:试验Xb:手和手指摩擦引起的符号及文字的磨蚀

耐码垛性试验Pressure test for stackability

GB/T 9280-2008 (色漆和清漆) Paints and varnishes. Pressure test for stackability色漆和清漆.耐码垛性试验

ISO 4622:1992 (废止) Paints and varnishes - Pressure test for stackability油漆和清漆．堆积压力测试

ISO 9117-2:2010 Paints and varnishes-Drying tests-Part 2:Pressure test for stackability涂料和清漆.干燥试验.第2部分:耐码垛性试验

耐污染测试Contamination resistance

MS210-05-2018 Plastic成型品-内装用

耐沾污Dirt pickup resistance

GB/T 9755-2014 第5.17节附录A Synthetic resin emulsion coatings for exterior wall合成树脂乳液外墙涂料

GB/T 9757-2001 第5.12节 附录A Solvent-thinned coatings for exterior wall溶剂型外墙涂料

GB/T 9780-2013 第5节 (外墙涂料) Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint建筑涂料涂层耐沾污性试验方法

GB/T 9780-2013 第6节 (内墙涂料) Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint建筑涂料涂层耐沾污性试验方法

杯突Cupping test

ISO 1520:2006 Paints and varnishes－Cupping test涂料和清漆.杯突试验

GB/T 9753-2007 Paints and varnishes.Cupping test 色漆和清漆 杯突试验

JIS K 5600-5-2:1999 Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 2: Cupping Test油漆的测试方法 - 第 5 部分：薄膜的机械性能 - 第 2 部分：杯突试验

GB/T13448-2019 Section 14.5.1 Test methods for prepainted steel sheet and strip彩色涂层钢板及钢带试验方法

GB/T 13448-2019 Section 14.5.2 Test methods for prepainted steel sheet and strip彩色涂层钢板及钢带试验方法

涂层耐洗刷性Brush resistance

ISO 11998:2006 (色漆清漆) Paints and varnishes－Determination of wet-scrub resistance and cleanability of coatings涂料和清漆.涂层耐湿式洗涤和可清洗性测定

GB/T 31410-2015 Paints and varnishes.Determination of wet-scrub resistance and cleanability of coatings色漆和清漆 涂层耐湿擦洗性和可清洁性的评定

GB/T 9266-2009 (建筑涂料) Determination of scrub resistance of film of architectural paints and coatings建筑涂料.涂层耐洗刷性的测定

GMW14865-2012 Determination of Scratch Resistance of Organic Coatings - Simulation of Car Wash Installations有机涂层耐刮擦性的测定.洗车装置的模拟

STD 1024,7134-1994 沃尔沃标准

ASTM D2486-17 (墙漆材料) Standard Test Methods for Scrub Resistance of Wall Paints墙漆耐擦洗性的标准试验方法

碎石冲击Stone Chip test

SAE J400-2002 (R2012) Test for Chip Resistance of Surface Coatings表面涂层耐切削试验

ASTM D3170/D3170M-14 Standard Test Method for Chipping Resistance of Coatings覆层耐切割性的标准试验方法

DIN EN ISO 20567-1:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing油漆和清漆 - 涂层抗石屑性的测定 - 第 1 部分：多重冲击试验

BS EN ISO 20567-1:2007 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing油漆和清漆 - 涂层抗石屑性的测定 - 第 1 部分：多重冲击试验

DIN 55996-1:2001 Paints and varnishes - Stone chip resistance test for coatings - Part 1: Multi impact test涂料和清漆.涂层耐石头碎片划伤试验.第1部分:多次冲击试验

密度Density

ASTM D1475-13 (比重瓶法) Standard Test Method For Density of Liquid Coatings, Inks, and Related Products测定液体涂料、油墨和相关产品密度的标准试验方法

ISO 2811-1:2016 (比重瓶法) Paints and varnishes - Determination of density - Part 1: Pycnometer method色漆和清漆.密度的测定.第1部分:比重瓶法(ISO 2811-1-2016)

GB/T 6750-2007 (比重瓶法) Paints and varnishes.Determination of density.Pyknometer method色漆和清漆 密度的测定 比重瓶法

粘度Viscosity

ASTM D2196-18ε1 (旋转粘度计法)Method A Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer采用旋转粘度计的非牛顿材料流变性能的标准试验方法

GB/T 1723-1993 (涂-1/涂-4粘度计)甲法、乙法 Determination of viscosity of coatings涂料粘度测定法

GB/T 2794-2013 (旋转粘度计法) Determination for viscosity of adhesives.Single cylinder rotational viscometer method胶粘剂粘度的测定 单圆筒旋转粘度计法

GB/T 7193-2008 (旋转粘度计法) Test methods for unsaturated polyester resins不饱和聚酯树脂试验方法

ASTM D5125-10 (2014) (ISO流量杯法) Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups用ISO流量杯法对涂料及有关材料粘度的标准试验方法

ASTM D562-10 (2018) (斯脱默粘度计) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer斯氏(Stormer)粘度计测定油漆稠度(Krebs粘度单位)的标准试验方法

ISO 2431:2019 (ISO 流量杯法) Paints and varnishes－Determination of flow time by use of flow cups涂料和清漆.用流量杯测定流动时间

GB/T 9269-2009 B法 (斯脱默粘度计) Determination of viscosity of paints and coatings-Stormer viscosimeter method涂料黏度的测定 斯托默黏度计法

GB/T 6753.4-1998 (ISO 流量杯法) Paints and varnishes--Determination of flow time by use of flow cups色漆和清漆 用流出杯测定流出时间

ASTM D3236-15 (旋转粘度计法) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials热熔粘合剂及涂层材料表观粘度的标准试验方法

ASTM D4212-16 (蔡恩杯) Standard Test Method for Viscosity by Dip-Type Viscosity Cups采用浸渍型粘度杯的粘度标准试验方法

ASTM D1200-10 (2014) (福特杯) Standard Test Method for Viscosity by Ford Viscosity Cup福特粘度杯法测定粘度的标准试验方法

白点温度和最低成膜温度Determination of white point temperature and minimum film-forming temperature

GB/T 9267-2008 Emulsions for coatings and polymer dispersions for coatings and plastics.Determination of white point temperature and minimum film-forming temperature涂料用乳液和涂料、塑料用聚合物分散体.白点温度和最低成膜温度的测定

ISO 2115:1996 Plastics - Polymer dispersions - Determination of white point temperature and minimum film-forming temperature塑料.聚合物分散体.白点温度和最低膜成形温度测定

ASTM D2354-10R18 (废止) Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles乳液载体最低成膜温度 (MFFT) 的标准测试方法

闪点 快速平衡闭杯法Flash Point Closed Cup Equilibrium Method

GB/T 5208-2008 Determination of flash point.Rapid equilibrium closed cup metho闪点的测定.快速平衡闭杯法

ISO 1523-2002 Industrial automation systems and integration - Product data representation and exchange - Part 1523: Application module: Shape data quality criteria工业自动化系统和集成. 产品数据表示和交换. 第1523部分: 应用模块: 形状数据质量标准

ISO 3679:2015 Determination of flash no-flash and flash point. Rapid equilibrium closed cup method无闪点和闪点的测定. 快速平衡闭杯法

震荡砂磨耗Abrasion Resistence Oscillating Sand Method

ASTM F735-17 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method用摆动沙袋法测定透明塑料及涂层抗磨损行的标准试验方法

细度Fine degree

GB/T 1724-2019 Paints,varnishes and printing inks—Determination of fineness of grind色漆、清漆和印刷油墨 研磨细度的测定

ISO 1524:2020 Paints, varnishes and printing inks - Determination of fineness of grind色漆、清漆和印刷油墨. 研磨细度的测定

T/ZZB 0427-2018 第5.4.2节 水性紫外光固化涂料团体标准

GB/T 6753.1-2007 (废止) Paints,varnishes and printing inks.Determination of fineness of grind色漆 清漆和印刷油墨 研磨细度的测定

稠度Consistency

GB/T 1749-1979 (R1989) 厚漆,腻子稠度测定法Method of test for consistency of pastes and putties

干燥时间Dry time

ISO 9117-3:2010 Paints and varnishes-Drying tests-Part 3:Surface-drying test using ballotini涂料和清漆.干燥试验.第3部分:利用小玻璃球的表面干燥试验

GB/T 9273-1988 Print-free test of film漆膜无印痕试验

ISO 9117-6:2012 Paints and varnishes — Drying tests–Part 6: Print-free test涂料和清漆.干燥试验.第6部分:无印痕测试

GB/T 1728-79 (R1989) 漆膜、腻子膜干燥时间测定法

GB/T 6753.2-86 涂料表面干燥试验

ISO 9117-4: 2012 Method A Paints and varnishes — Drying tests–Part 4: Test using a mechanical recorder涂料和清漆.干燥试验.第4部分:使用机械记录器测试

ASTM D5895-13 Method A Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders用机械记录仪评定有机涂层膜形成过程中干燥或固化的标准试验方法

完全干燥状态和时间Through-dry state and through-dry time

ISO 9117-1:2009 Paints and varnishes-Drying tests-Part 1:Determination of through-dry state and through-dry time涂料和清漆.干燥试验.第1部分:干燥状态和干燥时间测定

GB/T 37362.1-2019 Paints and varnishes—Drying tests—Part 1: Determination of through-dry state and through-dry time色漆和清漆 干燥试验 第1部分：完全干燥状态和完全干燥时间的测定

色漆和清漆的抗流挂性Paints and varnishes-Evaluation of sag resistance

GB/T 9264-2012 Paints and varnishes.Evaluation of sag resistance色漆和清漆 抗流挂性评定

ISO 16862:2003 Paints and varnishes－Evaluation of sag resistance涂料和清漆.抗凹陷性评定

ASTM D4400-18 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator多切口涂板器测试涂料抗下垂性的标准试验方法

ASTM D3730-17 section 8.2.3 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings高性能内结构墙涂层试验的标准指南

光反射系数luminous reflectance factor

ASTM E1477− 98a (2017)E1 (涂层板) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers使用集成球形反射计测定音响材料反光因素的标准试验方法

反射率Light reflectance value

BS 8493:2008+A1:2010 (废止) Light reflectance value (LRV) of a surface - Method of test表面光反射值(LRV).试验方法

漆膜光泽度Gloss of Coating Film

ASTM D523-14 (2018) Standard Test Method for Specular Gloss镜面光泽度的标准试验方法

ISO 2813:2014 Paints and varnishes - Determination of gloss value at 20°, 60° and 85°涂料和清漆. 20°, 60°以及85°时光泽度的测定

GB/T 9754-2007 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20°,60°and 85°色漆和清漆 不含金属颜料的色漆漆膜的20°、60°和85°镜面光泽的测定

T/ZZB 0427-2018 第5.4.10节 水性紫外光固化涂料团体标准

JIS K5600-4-7:1999 Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 7: Specular Gloss油漆测试方法 - 第 4 部分：薄膜的视觉特性 - 第 7 部分：镜面光泽

GB/T 13891-2008 (建筑饰面材料) Test methods of specular gloss for decorative building materials建筑饰面材料镜向光泽度测定方法

EN 13523-2：2014 (金属覆层) Coil coated metals. Test methods. Gloss卷材覆层金属.试验方法.光泽度

色差Color Differences

ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates计算仪器测量颜色的颜色容差和色差的标准实施规程

ISO 7724.1,2,3:1984 (已废止) Paints and varnishes－Colorimetry－Part 1：Principles涂料和清漆.比色法.第1部分:原理 Paints and varnishes－Colorimetry－Part 2：Colour measurement涂料和清漆.比色法.第2部分:颜色测定 Paints and varnishes－Colorimetry－Part 3：Calculation of color differences涂料和清漆.比色法.第3部分:色差计算

GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles漆膜颜色的测量方法 第1部分:原理

GB/T 11186.2-1989 Methods for measuring the colour of paint films--Part 2:Colour measurement漆膜颜色的测量方法 第2部分:颜色测量

GB/T 11186.3-1989 Methods for measuring the colour of paint films--Part 3:Calculation of colour differences漆膜颜色的测量方法 第3部分:色差计算

GB/T 3979-2008 Methods for the measurement of object color物体色的测量方法

AATCC 173-2015 (织物) CMC: Calculation of Small Color Differences for Acceptability颜色测量委员会(CMC):可接受性小色差的计算

BS EN ISO 105-J03:2009 (纺织品) Textiles. Tests for colour fastness. Part J03. Method for calculation of colour differences纺织品. 色牢度试验. 第J03部分. 色差的计算方法

ISO 105-J03: 2009 (纺织品) Textiles. Tests for colour fastness. Part J03. Method for calculation of colour differences纺织品. 色牢度试验. 第J03部分. 色差的计算方法

GB/T 3810.16-2016 (陶瓷) 陶瓷砖试验方法 第16部分:小色差的测定

ISO 10545-16: 2010 (陶瓷) Ceramic tiles - Part 16: Determination of small colour differences瓷砖.第16部分:小色差的测定

ISO 105-A02:1993/Cor 2:2005 (织物) Textiles. Tests for colour fastness. Part A02. Grey scale for assessing change in colour纺织品. 色牢度试验. 第A02部分. 评定颜色变化用灰色样卡

ASTM D6290-19 (塑料粒料) Standard Test Method for Color Determination of Plastic Pellets塑料丸粒颜色测定的标准试验方法

EN 20105-A02:1994 Textiles - Tests for colour fastness - Grey scale for assessing change in colour纺织品.色牢度试验.第A02部分:色泽变化评定灰度等级

AATCC Evaluation Procedure 1-2012 (织物) Gray Scale for Color Change用于颜色变化的灰度

GB/T 250-2008 Textiles.Tests for colour fastness.Grey scale for assessing change in colour纺织品.色牢度试验.评定变色用灰色样卡

ASTM D2616-2019 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale用灰度标评定视觉色差的标准试验方法

PV 3952-2002 塑料内腔构件耐刮伤

DIN EN ISO 11664-3:2013 (取代DIN 5033-4:1992) Colorimetry - Part 3: CIE tristimulus values比色法.第3部分:CIE三色值

QB/T 2804-2006 (2017) 纸和纸板白度测定法 45/0定向反射法

TAPPI T 524 OM-13 Color of paper and paperboard (45/0, C/2)纸和纸板的颜色 (45/0, C/2)

TAPPI T 562 OM-05 (R2010) CIE whiteness and tint of paper and paperboard (45/0 geometry, C/2 illuminant/observer)纸和纸板的 CIE 白度和色调（45/0 几何形状，C/2 光源/观察者）

TAPPI T 646 OM-06 (R2011) Brightness of clay and other mineral pigments (45/0)粘土和其他矿物颜料的亮度 (45/0)

GB/T 22295-2008 Standard test method for color of transparent liquids(Gardner color scale)透明液体颜色测定方法(加德纳色度)

ASTM D1544-04 (2010) Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)透明液体颜色的标准试验方法(加德纳色标)

ASTM E1347− 06 (2015) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry用三刺激比色法测量颜色和色差的标准试验方法

GB/T 7921-2008 Uniform color space and color difference formula均匀色空间和色差公式

EN 13523-3：2014 (金属覆层) Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison涂覆金属卷材.试验方法.第3部分:色差.仪器比较

ASTM E1331-15 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry采用半球体几何形状的分光光度法测量反射系数和颜色的标准试验方法

灰标评级Evaluation of grey scale

ISO 105-A05-1996 COR 2:2005 (纺织品) Textiles - Tests for colour fastness - part A: 纺织品 - 色牢度测试 - A 部分：

DIN EN ISO 105-A05-1997 (纺织品) Textiles - Tests for colour fastness - part A: 纺织品 - 色牢度测试 - A 部分：

EN ISO 105-A05-1997 (纺织品) Textiles - Tests for colour fastness - part A: 纺织品 - 色牢度测试 - A 部分：

AATCC EP7-2015e (纺织品) Evaluation Procedure for Instrumental Assessment of the Change in Color of a Test Specimen测试样品颜色变化的仪器评估评估程序

沾色灰标评级Evaluation of grey scale for assessing staining

AATCC EP12-2017 Evaluation Procedure for Instrumental Assessment of Degree of Staining染色程度仪器评估的评估程序

ISO 105-A04-1989 Textiles - Tests for Colour Fastness - Part A04: Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics纺织品 - 色牢度试验 - A04 部分：相邻织物染色程度的仪器评估方法

多角度色差Multi-Angle Color Difference

SAE J1545-2005 Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim 用于外部饰面、纺织品和有色装饰的仪器色差测量

ES-X63131:2011 Clause 5.6.2 涂膜—用于硬质热塑性塑料部件

ASTM D2244-16 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates计算仪器测量颜色的颜色容差和色差的标准实施规程

ASTM E1164-12 (2017)e1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation获取物体颜色评定用分光光度计数据的标准实施规程

ASTM E308-18 Standard Practice for Computing the Colors of Objects by Using the CIE System用CIE系统计算物体颜色的标准实施规程

DIN 6175-2019取代DIN 6175-2:2001

黄色指数Yellow Index

ASTM E313-15ε1 (塑料、涂料) Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates计算仪器测量颜色坐标的白色和黄色指数的标准实践规程

桔皮 (LW, SW, du, Wa, Wb, Wc, Wd, We, DOI) Orange peeling，双波扫描 (LW、SW、Du、Wa、Wb、Wc、Wd、We) Dual Wave Scan，WS值 Wave Scan Value，CF值 CF Value

TY-9978-03-04

ASTM D3451-06R17 Standard Guide for Testing Coating Powders and Powder Coatings试验涂层粉末和粉末涂层的标准指南

ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces利用仪器测量涂层表面映像清晰度(DOI)光泽的标准试验方法

鲜艳度测试DOI Distinctness-of-Image Gloss (DOI):

ASTM D3451-06R17 Standard Guide for Testing Coating Powders and Powder Coatings试验涂层粉末和粉末涂层的标准指南

ASTM D5767-18 Standard Test Method for Instrumental Measurement of Distinctness-of-Image (DOI) Gloss of Coated Surfaces利用仪器测量涂层表面映像清晰度(DOI)光泽的标准试验方法

涂料遮盖力Hiding Power of Paint

ISO 2814:1973 (已废止) Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour涂料和清漆.同类型颜色涂料对比率(遮盖力)

EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour涂料和清漆.同类型颜色涂料对比率(遮盖力)

BS EN ISO 2814:2006 Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour涂料和清漆.同类型颜色涂料对比率(遮盖力)

GB/T 1726-1979 (甲法：刷涂法) Methods of test for hiding power of paints涂料遮盖力测定法

GB/T 1726-1979 (乙法：喷涂法) Methods of test for hiding power of paints涂料遮盖力测定法

ISO 6504-3:2006 第7.5节 (白色或浅色漆) Paints and varnishes-Determination of hiding power- Part 3:Determination of contrast ratio of light-coloured paints at a fixed spreading rate涂料和清漆.遮盖力的测定.第3部分:以固定扩展速率测定浅色涂料的对比率(不透明度)

ES-X63131-2018 第5.5节 涂膜—用于硬质热塑性塑料部件

漆膜耐水性 (浸泡法)Water resistance (immersion method)

ASTM D870-15 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion采用水浸渍法进行涂层耐水性能试验的标准实践规程

ISO 2812-2:2018 Paints and varnishes－Determination of resistance to liquids－ Part 2：Water immersion method涂料和清漆.耐液体性测定.第2部分:浸液法

GB/T 5209-85 Paints and varnishes--Determination of resistance to water--Water immersion method色漆和清漆耐水性的测定 浸水法

GB/T 1733-1993 Determination of resistance to water of films漆膜耐水性测定法

JIS K5600-6-2: 2016 (涂层件) Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life涂料试验方法.第2部分:涂料的特性和稳定性.第6部分:有效期

漆膜耐化学试剂性 (浸泡法)Reagent resistance (immersion method)

ISO 2812-1:2017 Paints and varnishes. Determination of resistance to liquids. Immersion in liquids other than water涂料和清漆.耐液体测定.除水外的液体浸渍

T/ZZB 0427-2018 第5.4.12节 水性紫外光固化涂料团体标准

GB 9274-1988 甲法 (浸泡法) 色漆和清漆 耐液体介质的测定

GB 9274-1988 乙法 (吸收性介质法) 色漆和清漆 耐液体介质的测定

GB 9274-1988 丙法 (点滴法) 色漆和清漆 耐液体介质的测定

GB 1763-79 Methods of test for chemical resistance of paint films漆膜耐化学试剂性测定法

GB/T 9265-2009 (建筑涂料耐碱溶液) Determination for alkali resistance of film of architectural paints and coatings建筑涂料.涂层耐碱性的测定

EN 12720:2009+A1:2013 (家具面漆、吸收性介质法) Furniture - Assessment of surface resistance to cold liquids;家具.表面耐冷液体性能的评估.

EN 12721:09+A1:2013 (家具面漆) Furniture - Assessment of surface resistance to wet heat家具. 表面耐湿热评估

漆膜耐溶剂性 (擦拭法) Solvent resistance ( by Rubbing)

ASTM D5402-2019 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs用溶剂擦除法评估有机覆层的耐溶性的标准实施方法

GB/T 23989-2009 Method A、Method B Determination for the solvent resistance of coatings by solvent rubs涂料耐溶剂擦拭性测定法

ASTM D4752-10 (2015) (富锌底漆) Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub溶剂擦拭法测定硅酸乙酯(无机)富锌底漆的甲乙酮耐受性的标准实施规程

漆膜耐化学试剂 (点滴法)Resistance to liquids (Spotting methods)

ISO 2812-4:2017 Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods涂料和清漆.耐液体性的测定.第4部分:测定点位法

漆膜耐化学试剂 (吸附介质法)resistance to liquids (Method using an absorbent medium)

ISO 2812-3:2019 Paints and varnishes ㅡ Determination of resistance to liquids ㅡ Part 3: Method using an absorbent medium涂料和清漆.耐液体性测定.第3部分:利用吸收剂介质的方法

耐盐浴Resistance to salt bath

QB/T 1950-2013 (家具面漆) Determination of resistance to salt water of furniture surface coatings家具表面漆膜耐盐浴测定法

耐人工汗液Synthetic perspiration resistance

BS EN ISO 12870:2018 (眼镜框) Clause 8.3 Ophthalmic optics. Spectacle frames. Requirements and test methods眼科光学.眼镜镜架.试验方法和要求

ISO 3160-2:2015 (手表镀层) Clause 7.4 Watch-cases and accessories. Gold alloy coverings. Determination of fineness, thickness, corrosion resistance and adhesion表壳和附件.金合金覆盖层.纯度、厚度、耐腐蚀性能和结合强度的测定

硝酸蒸汽腐蚀Nitric acid vapour test

ISO 14647: 2000 (金镀层) Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test金属覆盖层.金属基体上金镀层孔隙率的测定.硝酸蒸气法

EIA 364-53B-2000 (R2016) (电子连接器的金面层) TP-53B Nitric Acid Vapor Test, Gold Finish Test Procedure for Electrical Connectors and SocketsTP-53B电连接器和插座硝酸蒸气试验,镀金层

耐腐蚀Corrosion resistance

QB/T 3829-1999 (金属镀层) Corrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products.Corrodkote test (CORR)轻工产品金属镀层和化学处理层的耐腐蚀试验方法.腐蚀膏试验(CORR)法

ASTM B380− 97 (2018) (装饰性电镀层) Standard Test Method of Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure装饰电镀层的涂膏密室耐蚀试验标准试验方法范

丝状腐蚀Filiform corrosion

ISO 4623-2: 2016 (铝合金表面涂膜) Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底

GB/T 26323-2010 (铝合金表面涂膜) Paints and varnishes.Determination of resistance to filiform corrosion on aluminium and aluminium alloys色漆和清漆 铝及铝合金表面涂膜的耐丝状腐蚀试验

GB/T 13452.4-2008 (钢铁基材上的色漆和清漆) Paints and varnishes.Determination of resistance to filiform corrosion on steel色漆和清漆.钢铁表面上涂膜的耐丝状腐蚀试验

ISO 4623-1: 2018 (钢铁基材上的色漆和清漆)

针孔腐蚀Pitting corrosion

ISO 8993: 2018 (阳极氧化膜) Anodizing of aluminium and its alloys. Rating system for the evaluation of pitting corrosion. Chart method铝和铝合金的阳极氧化. 点状腐蚀评估的评级系统. 图版法

改进腐蚀试验Modified corrodkote corrosion test

DIN 50958:2012 (电镀涂层件) Electroplated coatings - Modified corrodkote corrosion test (mod. CORR-Test)电镀层.按改良的柯洛特考得(corrodkote)腐蚀试验(mod. CORR-Test)

耐高温Heat resistant properties

ASTM D2485–18 Method A (涂层件) Standard Test Methods for Evaluating Coatings For High Temperature Service高温设备用涂层评定的标准试验方法

抗粘连接Blocking Resistance

ASTM D4946− 89 (2016) (涂层件) Standard Test Method for Blocking Resistance of Architectural Paints建筑涂料耐结块的试验方法

烘烤质量损失Mass loss by baking

ISO 8130-7:2019 Coating powders - Part 7: Determination of loss of mass on stoving粉末涂料.第7部分:烘烤时质量损失的测定

GB/T 21782.7-2008 Coating powders.Part 7:Determination of loss of mass on stoving粉末涂料.第7部分:烘烤时质量损失的测定法

固体含量Solid content

ISO 3251:2019 Paints and varnishes. Determination of the percentage volume of non-volatile matter. Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solve涂料和清漆. 非挥发性物质百分比容积的测定. 采用依照ISO 3251确定的非挥发性物质含量计算测定涂层材料密度和涂层材料中的溶剂密度测定

GB/T 1725-2007 Paints,varnishes and plastics.Determination of non-volatile-matter content色漆、清漆和塑料 不挥发物含量的测定

T/ZZB 0427-2018 第5.4.5节 水性紫外光固化涂料团体标准

GB/T 1747.2-2008 (颜料含量) Paints and varnishes. Determination of pigment content. Part 2: Ashing method色漆和清漆.颜料含量的测定.第2部分:灰化法

ASTM D4441-15 第8.3.4节 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene聚四氟乙烯的水分散体的标准规范

不挥发份含量Non volatile matter

ASTM D1353-13 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products涂漆、清漆、喷漆及相关产品用挥发性溶剂中不挥发物质的标准试验方法

挥发份含量Volatile content

ASTM D2369-20 Standard Test Method for Volatile Content of Coatings涂层挥发物含量的标准试验方法

ISO 787-2:1981 (颜料和填料) General methods of test for pigments and extenders. Determination of matter volatile at 105 °C颜料和填充剂的一般试验方法. 105 ℃时挥发物的测定

不挥发物体积分数Volume of Non-volatile Matter

GB/T 9272-2007 Paints and varnishes.Determination of percentage volume of non-volatile matter by measuring the density of a dried coating色漆和清漆 通过测量干涂层密度测定涂料的不挥发物体积分数

ISO 3233-1:2013 MOD Paints and varnishes. Determination of the percentage volume of non-volatile matter. Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle涂料和清漆.非挥发物体积百分率的测定.使用涂层试验板测定非挥发性物质及通过阿基米德(Archimedes)原理测定干膜密度的方法

白垩试验Chalking Test

ASTM D4214-07 (2015) Method B Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films评定外用漆膜粉化程度的标准试验方法

镀层厚度Thickness of Plating

ASTM B 504-90 (2017) Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method用库仑法测量金属镀层厚度的试验方法

GB/T 4955-2005 Metallic coatings.Measurement of coating thickness.Coulometric method by anodic dissolution金属覆盖层 覆盖层厚度测量 阳极溶解库仑法

ISO 2177:2003 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution金属覆层.覆层厚度的测量.阳极溶解库仑法

DIN EN ISO 2177:2004 Measurement of coating thickness - Coulometric method by anodic dissolution金属覆层.覆层厚度的测量.阳极溶解库仑法

ISO 4525:2003 附录F Metallic coatings-Electroplated coatings of nickel plus chromium on plastics materials金属镀层.金及金合金镀层的试验方法.第5部分:粘着力试验

GB/T 12600-2005 附录F Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials金属覆盖层 塑料上镍+铬电镀层

DIN EN 16866:2018 (取代DIN 50022:2007) Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)金属和其他无机涂层。多层镍镀层中各层厚度和电极电位的同时测定（阶梯试验）

ASTM B764-04 (2014) Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)多层镍镀层中单层的同步厚度和电极电位测定的标准试验方法(STEP试验)

GB/T 16921-2005 Metallic coatings.Measurement of coating thickness.X-ray spectrometric methods金属覆盖层 覆盖层厚度测量 X射线光谱法

ISO 3497:2000

DIN EN ISO 3497:2001 Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods金属镀层.镀层厚度的测量.X射线光谱测定法

ASTM B568-98 (2014)

ASTM A754/A754M-18 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence用X射线荧光测定钢上金属涂层涂层重量(质量)的标准试验方法

JIS H8501:1999 Methods of Thickness Test for Metallic Coatings金属涂层的厚度测试方法

ISO 4525:2003 附录F Metallic coatings-Electroplated coatings of nickel plus chromium on plastics materials金属镀层.金及金合金镀层的试验方法.第5部分:粘着力试验

GB/T 12600-2005 附录F Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials金属覆盖层 塑料上镍+铬电镀层

铬孔密度Micropore Density of Chrome-Plated Surfaces

PV 1063:2013 大众汽车标准

GS 97017:2009 Section 5.2.3 宝马塑胶电镀规范

微孔数和微裂纹测试Minimum Discontinuities

ASTM B604-91 (2015) Annex X4 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics塑料表面装饰用铜加镍铬镀层的标准规范

ASTM B456-17 Annex X4 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium铜+镍+铬和镍+铬电沉积涂层的标准规格

ISO 4525:2003 附录E Metallic coatings-Electroplated coatings of nickel plus chromium on plastics materials金属镀层.金及金合金镀层的试验方法.第5部分:粘着力试验

GB/T 12600-2005 附录E Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials金属覆盖层 塑料上镍+铬电镀层

微裂纹Microcracks

DIN 53100:2007 Metallic coatings - Electroplated coatings of nickel plus chromium and of copper plus nickel plus chromium on plastics materials金属凃层.塑料材料上镍铬的电镀涂层和铜镍铬的电镀涂层

ISO 4525:2003 附录E Metallic coatings-Electroplated coatings of nickel plus chromium on plastics materials金属镀层.金及金合金镀层的试验方法.第5部分:粘着力试验

GB/T 12600-2005 附录E Metallic coatings.Electroplated coatings of nickel plus chromium on plastics materials金属覆盖层 塑料上镍+铬电镀层

液体涂料制板Coating plate preparation with liquid coating

空气喷涂

自动涂布器

摆杆硬度Pendulum damping test

GB/T 1730-2007 方法A/方法B Paints and varnishes.pendulum damping test色漆和清漆 摆杆阻尼试验

ISO 1522-2006 Industrial automation systems and integration - Product data representation and exchange - Part 1522: Application module: Product data quality inspection result工业自动化系统和集成. 产品数据表示和交换. 第1522部分: 应用模块: 产品数据质量检验结果

ASTM D4366-16 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests使用摆阻尼试验测定有机涂层硬度的标准试验方法

腻子打磨性Rubbing test of putty films

GB/T 1770-2008 Rubbing test of coatings and putty films涂膜、腻子膜打磨性测定法

漆膜回粘性Tackiness of paint film

GB/T 1762-80 (89) Method of test for after-tack of paint films漆膜回粘性测定法

UV固化性能UV curing

HG/T 3655-2012第5.4.5节 Ultraviolet curing coatings for woodenware3655-2012 紫外光（UV）固化木器涂料

闪锈抑制性Flash rust inhibition

HG/T 4759-2014 Water-based epoxy anticorrosive coatings水性环氧树脂防腐涂料

色漆和清漆 T-弯试验Paints and varnishes T-bend test

GB/T 30791-2014 Paints and varnishes.T-bend test色漆和清漆 T弯试验

ISO 17132: 2007 Paints and varnishes ㅡ T-bend test涂料和清漆-T-弯曲试验