电阻率/导电率Resistivity/Conductivity

ASTM B193-19 Standard Test Method for Resistivity of Electrical Conductor Materials电导体材料电阻率的标准测试方法

ASTM B301/B301M-13 Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes自由切割铜杆 棒 线和形状的标准规格

GB/T 2061-2013 Foil of copper and copper alloys for heat-exchanger fin散热器散热片专用铜及铜合金箔材

GB/T 3954-2014 Aluminum and aluminum alloys rod for electrical purpose电工圆铝杆

GB/T 351-2019 Metallic materials—Resistivity measurement method金属材料 电阻率测量方法

GB/T 3048.2-2007 电线电缆电性能试验方法 第2部分：金属材料电阻率试验

GB/T 11091-2014 Copper strip for cables电缆用铜带

电导率&导电率Conductivity

ASTM E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method使用电磁（涡流）法确定电导率的标准测试方法

BS EN 2004-1:1993 Test methods for aluminum and aluminum alloy products - Determination of electrical conductivity of wrought aluminum alloys铝和铝合金产品试验方法.第1部分:锻铝合金电导率的测定

电流循环测试 Electric Current Cycling Test (ECC)

SAE USCAR-21-2020Section 4.5.1 Performance specification for cable-to-terminal electrical crimps电缆终端电卷曲的性能规范

导体电阻Conductor resistance

IEC 60228: 2004 Annex A（电线电缆） Conductors of insulated cables绝缘电缆导体

GB/T 3956-2008附录A（电线电缆） Conductors of insulated cables绝缘电缆导体

EN 3475-301:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Ohmic resistance per unit length航空航天系列.飞行器用电缆.试验方法.单位长度的欧姆电阻

连接电阻Connection resistance

ISO 4165: 2001 Section 6.4（连接器） Road vehicles - Electrical connections - Double-pole connection道路车辆 电气连接 双极接线盒

接触电阻Contact resistance

EIA-364-23C-2006(R2012) Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets电连接器和插座的低层接触电阻试验程序

IEC/EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements - Part 2-1: Electrical continuity and contact resistance tests; Test 2a: Contact resistance; Millivolt level method电子设备连接器.试验和测量.第2-1部分:电力连续性和接触电阻试验.试验2a:接触电阻.毫伏级方法

GB/T 5095.2-1997试验2a,2b Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests电子设备用机电元件 基本试验规程及测量方法 第2部分;一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验

接地(导通)电阻测试Grounding resistance test

EIA 364-06C-2006(R2012) Contact Resistance Test Procedure for Electrical Connectors电器连接器接触牢度的试验方法

IEC 61984:2008/Cor.1:2011 Section 7.3.13 Connectors - Safety requirements and tests连接器 - 安全要求和测试

绝缘电阻Insulation resistance test

EIA-364-21E-2014 电子连接器，插座和同轴触点的绝缘电阻测试程序

IEC 60512-3-1:2002 Connectors for electronic equipment－Tests and measurements－Part 3－1：Insulation tests－Test 3a：Insulation resistance电子设备用连接器试验和测量第3－1部分:绝缘试验试验3a:绝缘电阻

GB/T 5095.2-1997试验3a Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests电子设备用机电元件 基本试验规程及测量方法 第2部分;一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验

GB/T 20041.1-2015（导管）11.3.1.3 &11.3.1.4节 Conduit systems for cable management. Part 1:General requirements电缆管理用导管系统 第1部分:通用要求

耐高压测试Withstanding voltage test

GB/T 20041.1-2015（导管）11.3.1.1节 Conduit systems for cable management. Part 1:General requirements电缆管理用导管系统 第1部分:通用要求

EIA-364-20E-2015 电子连接器、插座和同轴触点的介电耐电压测试程序

IEC 60512-4-1:2003 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof电子设备用连接器.试验和测量.第4-1部分:电压应力试验.试验4a:耐电压

GB/T 5095.2-1997试验4a Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests电子设备用机电元件 基本试验规程及测量方法 第2部分;一般检查、电连续性和接触电阻测试、绝缘试验和电压应力试验

电压降测试Voltage drop test

EIA/ECA 364-06C-2006(R2012) Contact Resistance Test Procedure For Electrical Connectors

IEC/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 8-2: Static load tests (fixed connectors) - Test 8b: Static load, axial电子设备用连接器.试验和测量.第8-2部分:静态载荷试验(固定连接器).试验8b:轴向静态载荷

瞬断测试Electric disturbance test

EIA-364-46C-2012 Microsecond Discontinuity Test Procedure for Electrical Connectors, Contacts, and Sockets电气连接器,触点和插座用微秒间断性试验规程

温升测试Temperature Rise

EIA-364-70C-2014 Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets电气连接器和插座的温升与电流试验程序

ISO 8092-2: 2005 Section 4.14 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirement道路车辆.车载电气线束的联结.第2部分:定义、试验方法和一般性能要求

IEC 60512-5-1:2002 Connectors for Electronic Equipment - Tests and Measurements Part 5-1: Current-Carrying Capacity Tests - Tests 5a: Temperature Rise电子设备用连接器.试验和测量.第5-1部分:载流容量试验.试验5a:温升

GB/T 5095.3-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests电子设备用机电元件 基本试验规程及测量方法 第3部分;载流容量试验

GB/T 2317.3-2008第7节 Test method for electric power fittings. Part 3:Heat cycle tests for electric power fittings电力金具试验方法.第3部分:热循环试验

降额曲线Derating curve

IEC 60512-5-2:2002 Connectors for Electronic Equipment - Tests and Measurements Part 5-2: Current-Carrying Capacity Tests - Test 5b: Current-Temperature Derating电子设备用连接器.试验和测量.第5-2部分:载流容量试验.试验5b:电流-温度下降

GB/T 5095.3-1997 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests电子设备用机电元件 基本试验规程及测量方法 第3部分;载流容量试验

静电测试ESD Test

IEC 61000-4-2-2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test电磁兼容性（emc） - 第4-2部分:测试和测量技术 - 静电放电抗扰度测试

ISO 10605:2008 Road vehicles - Test methods for electrical disturbances from electrostatic discharge公路车辆.静电放电中电干扰的试验方法

GB/T 19951-2019 Road vehicles—Disturbances test methods for electrical/electronic component from electrostatic discharge道路车辆 电气/电子部件对静电放电抗扰性的试验方法

耐电痕化指数Proof tracking index(PTI)

IEC 60112:2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法

GB 4706.1-2005 附录N Household and similar electrical appliances-Safety Part 1:General requirements家用和类似用途电器的安全 第1部分;通用要求

GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法

UL746A-2012/Rev.12-2017 Polymeric materials - Short term property evaluations聚合材料.短期性能评定

相对电痕化指数Comparative Tracking Index(CTI)

IEC 60112:2009 Method for the determination of the proof and the comparative tracking indices of solid insulating materials固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法

GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials固体绝缘材料耐电痕化指数和相比电痕化指数的测定方法

GB 18802.1-2011 第7.9.6节 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems -Requirements and tests低压电涌保护器（SPD） 第1部分：低压配电系统的电涌保护器 性能要求和试验方法

ASTM D3638-12 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials电绝缘材料比较跟踪指标的标准测试方法

UL 746A-2012/Rev.12-2017 Polymeric materials - Short term property evaluations聚合材料.短期性能评定