系统脚手架System scaffold测试标准

ANSI/ASSE A10.8-2019 Safety Requirements for Scaffolding-American National Standard for Construction and Demolition Operations 脚手架安全要求-建筑及拆除操作美国国家标准

ANSI/SSFI SC100-5/05 STANDARDS FOR TESTING AND RATING SCAFFOLD ASSEMBLIES ANDCOMPONENTS脚手架整体和部件测试和分级标准

AS/NZS 1576.3:2015+A1:2017 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding 脚手架 第3部分：预制脚手架及钢管扣件脚手架

CAN/CSA-S269.2-M87:2003 Access scaffolding for construction purposes Structures(Design) 建筑用脚手架 结构(设计)

CSA-S269.2-16:2016 Access scaffolding for construction purposes Structures(Design) 建筑用脚手架 结构(设计)

EN 10002-1 Metallic Materials - Tensile Testing - Part 1: Method of Test at Ambient Temperature金属材料.拉力试验.第1部分:环境温度的试验方法

EN 12810-1 Façade scaffolds made of prefabricated components-Part 1: Products specification 由预制件构成的脚手架.第1部分：产品规范

EN 12810-2 Façade scaffolds made of prefabricated components - Part 2: Particular methods of structural design由预制件构成的脚手架.第2部分:结构设计的特殊方法

EN 12811-1 Temporary works equipment - Part 1: Scaffolds; Performance requirements and general design临时建筑设备.第1部分:脚手架.性能要求和一般设计

EN 12811-2 Temporary works equipment - Part 2: Information on materials临时建筑设备.第2部分:材料信息

EN 12811-3Temporary works equipment Part 3: Loading test临时工作设备 3：承载测试

EN 408 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties木材结构.结构木材和胶合板.某些物理和机械特性的测定

EN 74-3 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 3: Plain base plates and spigot pins - Requirements and test procedures脚手架和支承架用连接件、定位销和底板.第3部分:平底板和定位销.要求和试验程序.技术勘误

MS 1462-1Metal scaffolding - Part 1: Prefabricated scaffolds - Specification for steel frame scaffolding金属脚手架 - 第 1 部分： 预制脚手架--钢架脚手架规格

MS 1462-3-1METAL SCAFFOLDING -PART 3: PREFABRICATED SCAFFOLDS -SECTION 1: SPECIFICATION FOR STEELAND ALUMINIUM MODULAR SYSTEM SCAFFOLDING金属脚手架 - 第 3 部分： 预制脚手架--第 1 节：钢制和铝制组合系统脚手架规格

塔式脚手架 Work Tower测试标准

ANSI/SSFI SH300-2007 Standards for Testing and Rating Shoring Equipment支撑设备测试和分级标准

AS/NZS 1576.2 Scaffolding, Part 2: Couplers and accessories脚手架 第 2 部分：连接器和配件

AS/NZS 1576.3:2015+A1:2017 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding脚手架 第3部分：预制脚手架及钢管扣件脚手架

AS/NZS 1577 Scaffold decking components脚手架盖板组件

AS/NZS 1892.1 Portable ladders - Metal轻便梯.金属

EN 1004 Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements预制组件制的移动通道和工作塔. 材料、尺寸、设计载荷、安全和性能要求

EN 1004-1:2020 Mobile access and working towers made of prefabricated elements --- Materials, dimensions, design loads, safety and performance requirements 预制组件制的移动通道和工作塔.材料、尺寸、设计载荷、安全和性能要求

EN 12811-2 Temporary works equipment - Part 2: Information on materials临时建筑设备.第2部分:材料信息

EN 131-2 Ladders - Part 2: Requirements, testing, marking梯子.第2部分:试验,标记和要求

小型脚手架 Minor scaffold测试标准

AS/NZS 1577 Scaffold decking components脚手架盖板组件

PAS 250 Low-level work platform with one working platform with side protection for use by one person with a maximum working platform height of less than 2.5m--Specification单人用有边部防护栏工作平台高度不超过2.5m的低层次单工作平台

AS/NZS 1576.3:2015+A1:2017 Scaffolding Part 3: Prefabricated and tube-and-coupler scaffolding脚手架 第3部分：预制脚手架及钢管扣件脚手架

赛德斯威(SATISFY)将提供脚手架测试的一站式服务，包括前期的评估、相关资料准备和提交、测试的全程跟进以及报告解读、数据分析和整改建议。