人造装饰板测试标准概述

人造装饰板包括各类人造板材、木地板、胶合板、纤维板等装饰材料，需要通过多种性能测试确保其质量、安全性和环保性。全球各地制定了相应的测试标准来规范这些产品的质量。

人造装饰板国际标准

ISO 10965 Textile floor coverings - Determination of electrical resistance铺地织物.电阻测定

ISO 12460 Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method木材.甲醛释放测定.第3部分:气体分析法

ISO 12466-1 Plywood - Bonding quality - Part 1: Test methods胶合板.胶合质量.第1部分:试验方法

ISO 16572 Timber structures - Wood-based panels - Test methods for structural properties木结构.木基板材.结构性能的试验方法

ISO 16978 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength木质板材.抗弯弹性模量和抗弯强度的测定

ISO 16979 Wood-based panels - Determination of moisture content木质板材.含水量的测定

ISO 16987 Wood-based panels - Determination of moisture resistance under cyclic test conditions木基板材.在循环试验条件下测定抗湿性

ISO 2426-2 Plywood - Classification by surface appearance - Part 2: Hardwood胶合板 按外观分类 第2部分:硬木

ISO 2426-3 Plywood - Classification by surface appearance - Part 3: Softwood胶合板 按外观分类 第3部分:软木

ISO 24334 Laminate floor coverings - Determination of locking strength for mechanically assembled panels强化地板覆盖物.机械组装面板的锁定强度的测定

ISO 24336 Laminate floor coverings - Determination of thickness swelling after partial immersion in water层压地板覆盖物.部分浸水膨胀后的厚度测定

ISO 24339 Laminate and textile floor coverings - Determination of dimensional variations after exposure to humid and dry climate conditions叠层板材和纺织地板覆盖物.经受潮及干燥气候条件后尺寸变化的测定

ISO 27528 Wood-based panels - Determination of resistance to axial withdrawal of screws木基板.螺钉轴向拔出耐受力的测定

ISO 3340 Fibre building boards; Determination of sand content建筑用纤维板 含砂量的测定

ISO 6356 Textile and laminate floor coverings - Assessment of static electrical propensity - Walking test铺地织物.静电特性评定.行走试验

ISO 9426 Wood-based panels - Determination of dimensions of panels木基板材.板材尺寸的测定

ISO 9427 Wood-based panels - Determination of density木基板材.密度的测定

ISO 12466-2 Plywood - Bonding quality - Part 2: Requirements胶合板.胶合质量.第2部分:要求

ISO 12465:2007 Plywood - Specifications胶合板-规范

ISO 13894-1:2000 High-pressure decorative laminates-Composite elements装饰用高压层压板-复合板 第1部分:试验方法

人造装饰板美国标准

ASTM D523 Standard Test Method for Specular Gloss镜面光泽度的标准试验方法

ANSI NEMA LD 3 High-Pressure Decorative Laminates高压装饰层压板

ASTM D1037-12 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials木基纤维/刨花板性能评估测试方法

人造装饰板欧洲标准

CEN/TS 13810-2 Wood-based panels - Floating floors - Part 2: Test methods人造板-浮动地板-第2部分：试验方法

EN 1058 Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values人造板 特征 5 百分位值和特征平均值的测定

EN 1081 Resilient, laminate and modular multilayer floor coverings - Determination of the electrical resistance弹性、层压和模块化多层地板覆盖物. 电阻测定

EN 1087-1 Particleboards - Determination of moisture resistance - Part 1: Boil test碎料板.耐湿测定.第1部分:煮沸试验

EN 12664 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods建筑材料和制品的热性能.用热流计和护热板法测定热阻值.中,低热阻的干湿制品

EN 12667 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods建筑材料和制品的热性能.用热流计和护热板法测定热阻值.高和中热阻值制品

EN 12721 Furniture - Assessment of surface resistance to wet heat家具.表面耐湿热评估

EN 13553 Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification弹性地板覆盖物.用于特别潮湿地区的聚氯乙烯地板覆盖物.规范

EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking建筑用人造板---特性，合格评定及标记

EN 14041 Resilient, textile and laminate floor coverings - Essential characteristics弹性、纺织和层压地板覆盖物.基本特性

EN 16516 Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air建筑产品：危险物质释放的评估-室内空气中排放物的测定

EN 17368 Laminate floor coverings - Determination of impact resistance with small ball层压地板覆盖物 小球抗冲击性能测定

EN 1815 Resilient and Textile Floor Coverings - Assessment of Static Electrical Propensity弹性地板和铺地织物.静电性能评估

EN 300 Oriented Strand Boards(OSB)---Definitions, classification and specifications定向刨花板(OSB)定义、分类和规格

EN 320 Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws塑合板和纤维板.抗螺钉轴向拔出力的测定

EN 438-2:2016+A1:2018 High-pressure decorative laminates (HPL)-Sheets based on thermosetting resins (usually called Laminates)-Part 2: Determination of properties装饰用高压层压制件(HPL).热固性树脂为基质的板材.第2部分：性能测试

EN ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method塑料.非泡沫塑料的密度测定方法.第1部分:浸入法、液体比重瓶法和滴定法

EN ISO 354 Acoustics - Measurement of sound absorption in a reverberation room声学.混响室中声吸收的测量

EN ISO 4892-2:2006/A1:2009 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps塑料实验室光源暴露试验方法.第2部分:氙弧灯

EN 13501 Fire classification of construction products and building elements建筑产品和建筑物构件的火灾分类

木地板标准

CEN/TC 13354 Solid wood flooring--Examination and test methods实木地板

CEN/TS 15676 Wood flooring --- Slip resistance --- Pendulum test木地板.防滑.振动试验

EN 13226 Wood flooring --- Solid parquet elements with grooves and/or tongues木地板---带有凹槽与舌状连接的实木地板

EN 13329:2016+A2:2021 Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods强化木地板（浸渍纸层压木地板）-表层基于氨基塑料热固性树脂-规格，要求和测试方法

EN 13489 Wood flooring --- Multi-layer parquet elements木地板---多层镶木地板

EN 13647 Wood flooring and wood panelling and cladding - Determination of geometrical characteristics木地板,木镶板和贴面层.几何特征的测定

EN 14342 Wood flooring - Characteristics, evaluation of conformity and marking木地板.特性,合格评定和标记

木基板材标准

EN 1533 Wood flooring - Determination of bending strength under static load - Test methods木地板.静载荷下的弯曲强度测定.试验方法

EN 12871 Wood-based panels - Performance specifications and requirements for load bearing boards for use in floors, walls and roofs木基板.地面,墙体和屋顶中使用的承载板的性能指标和要求

EN 120 Particleboards: Determination of Formaldehyde Content Extraction Method Called Perforator Method木基板.甲醛含量的测定.称为钻孔法的萃取法

EN 13446 Wood-based panels - Determination of withdrawal capacity of fasteners木基板材.紧固件拔出能力的测定

EN 311 Wood-based panels - Surface soundness - Test method木基板材.表面坚固性.试验方法

EN 310 Wood-based panels; determination of modulus of elasticity in bending and of bending strength木基板.弯曲弹性模量和弯曲强度的测定

EN 318 Wood-based panels - Determination of dimensional changes associated with changes in relative humidity木基板材.相对湿度变化引起尺寸变化的测定

EN 321 Wood-based panels - Determination of moisture resistance under cyclic test conditions木基板.循环试验条件下抗潮湿性的测定

EN 323 Wood-based panels; determination of density木基板.密度测定

EN 324-1 Wood-based panels; determination of dimensions of boards; part 1: determination of thickness, width and length木基板.板尺寸测定.第1部分:厚度,宽度和长度测定

EN 324-2 Wood-based panels; determination of dimensions of boards; part 2: determination of squareness and edge straightness木基板.板尺寸测定.第2部分:垂直度和边缘平直度测定

EN 326-1 Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results木基板.取样,剪切和检验.第1部分:试样的取样和剪切及试验结果的表述

EN 717-1 Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method木基板材.甲醛释出的测定.第1部分:用燃烧室法测定甲醛的排放量

EN 1195 Timber structures - Test methods - Performance of structural floor decking木材结构的试验方法.结构地板铺面的性能

EN 335-3 Durability of Wood and Wood-Based Products - Definition of Hazard Classes of Biological Attack - Part 3: Application to Wood- Based Panels木材和木材制品的耐久性.细菌侵害危险等级的定义.第3部分:木制板面的应用

EN 1534 Wood flooring - Determination of resistance to indentation - Test method木质地板.耐刻痕性测定.试验方法

ENV 1156 Wood-based panels. Determination of duration of load and creep factors木质板材.持续负荷和蠕变系数的测定

EN 13183-1 Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method一片锯断木材的含水量.第1部分:采用烘干法测定

EN 322 Wood-based panels; determination of moisture content木质板料.含湿度测定

EN 326-2 Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control木质板.取样,切割和检验.第2部分:初始类型试验和工厂产品控制

EN 335 Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products木材和木制品的耐久性.使用等级:实心木材及木质产品的应用、定义

叠层地板标准

EN 13893 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces弹性地板覆盖物,叠层地板覆盖物和铺地织物.干地板表面动态磨擦系数的测量

EN 14279 Laminated Veneer Lumber (LVL) - Definitions, classification and specifications (Incorporates Amendment A1: 2009)叠层胶合板材(LVL).定义,分类和规范.包含修改件A1-2009

EN 14755 Extruded particleboards - Specifications挤压刨花板 规范

EN 16094 Laminate floor coverings - Test method for the determination of micro-scratch resistance叠层地板覆盖物.耐微擦伤性测定的试验方法

EN 425 Resilient and laminate floor coverings - Castor chair test弹性地板和叠层地板覆盖物.椅子脚轮效应试验

刨花板标准

EN 312 Particleboards - Specifications 刨花板 - 规格

EN 317 Particleboards and fibreboards; determination of swelling in thickness after immersion in water刨花板和纤维板.在水中浸泡后膨胀厚度的测定

EN 319 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board刨花板和纤维板.与板平面垂直的拉伸强度的测定

胶合板标准

EN 314-1 Plywood - Bonding Quality - Part 1: Test Methods胶合板.胶合质量.第1部分:试验方法

EN 314-2 Plywood; bonding quality; part 2: requirements胶合板.胶合质量.第2部分:要求

EN 315 Plywood - Tolerances for dimensions胶合板.尺寸公差

EN 636:2012+A1:2015 Plywood - Specifications 胶合板---规范

纤维板标准

EN 622-1 Fibreboards - Specifications - Part 1: General requirements纤维板---规范---第一部分：一般要求

EN 622-2 Fibreboards - Specifications - Part 2: Requirements for hardboards纤维板---规范---第二部分：硬木板的要求

EN 622-3 Fibreboards - Specifications - Part 3: Requirements for medium boards纤维板---规范---第三部分：中密度板的要求

EN 622-5 Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)纤维板---规范---第五部分：干燥处理板的要求

EN 317 Particleboards and fibreboards; determination of swelling in thickness after immersion in water刨花板和纤维板.在水中浸泡后膨胀厚度的测定

人造装饰板英国标准

BS EN 14342 Wood flooring --- Characteristics, evaluation of conformity and marking木地板---特性，符合性评估以及商标

BS EN 438-3 High-pressure decorative laminates (HPL) --- Sheets based on thermosetting resins (Usually called laminates) ---Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第3部分:用于粘结支撑基质的不足2毫米厚的层压制件的分类和规范

BS EN 438-4 High-pressure decorative laminates(HPL) --- Sheets based on thermosetting resins (Usually called Laminates) ---Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范

BS EN 438-5 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).用于粘结支撑基质的厚度不足2毫米的楼板级层压板材的分类和规范

BS EN 438-6 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for Exterior-grade compact laminates of thickness 2 mm and greater

人造装饰板澳洲/新西兰标准

AS 6669-2016 Plywood-Formwork 胶合板-模板

AS/NZS 2269.0 Plywood-structural 结构胶合板

AS/NZS 2269.1 Plywood-Structure Part.1 Test methods胶合板---结构 第1部分：测试方法

AS/NZS 4266.1 Reconstituted wood-based panels - Methods of testing Part 1: Base panels 人造板-试验方法.第1部分：底板

AS/NZS 4266.2 Reconstituted Wood-Based Panels - Methods of Testing - Part 2: Decorative overlaid panels 人造板-试验方法.第2部分：饰面板

AS 6669 Plywood - Formwork层压板．样板

AS/NZS 1604.1 Specification for preservative treatment - Sawn and round timber防腐处理规范.锯材和圆木

AS/NZS 2098.1 Methods of test for veneer and plywood - Moisture content of veneer and plywood胶合板和层压板的试验方法．水分含量

AS/NZS 2098.11 Methods of test for veneer and plywood - Determination of formaldehyde emissions for plywood胶合板的试验方法.胶合板甲醛释放率的测定

AS/NZS 2098.2 Test methods for veneer and plywood Bonding quality of plywood (chisel test)单板和胶合板的试验方法 胶合板的粘合质量（凿子试验）

AS/NZS 2098.3 Methods of test for veneer and plywood - Bond quality and strength of scarf joints in plywood胶合板和层压板的试验方法．层压板嵌接的结合质量和强度

AS/NZS 2098.4 Methods of test for veneer and plywood - Measurement of dimensions and shape for sheets of veneer and plywood尺寸和层压板的试验方法．胶合板和层压板用板材的尺寸和形状测定

AS/NZS 2098.7 Methods of test for veneer and plywood - Density of veneer and plywood胶合板和层压板的试验方法．密度

AS/NZS 2269.0 Plywood Structural Specifications胶合板 结构 规范

AS/NZS 2269.1 Test method for determination of structural properties of plywood structures胶合板 结构 结构性能的测定 试验方法

AS/NZS 4063.1 Provides requirements for testing rectangular sections of sawn solid timber of commercial structural size to provide data for the determination结构木材的特性 测试方法

AS/NZS 4266.27 Reconstituted wood-based panels - Methods of test - Resistance to impact再生木基板．试验方法．耐冲击性

人造装饰板中国标准

GB 18580 Indoor decorating and refurbishing materials---Limit of formaldehyde emission of wood-based panels and finishing products室内装饰装修材料 人造板及其制品中甲醛释放限量

GB 19367 Wood-based panels. Determination of dimensions of panels人造板的尺寸测定

GB/T 11718 Medium density fibreboard中密度纤维板

GB/T 15036.2 Solid wood flooring--Examination and test methods实木地板 检验和试验方法

GB/T 15102 Surface decorated fiberboard and particleboard with paper impregnated thermosetting resins浸渍胶膜纸饰面纤维板和刨花板

GB/T 15104 Decorative veneered wood-based panel装饰单板贴面人造板

GB/T 17656 Plywood for concrete form混凝土模板用胶合板

GB/T 17657 Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels人造板及饰面人造板理化性能试验方法

GB/T 18102 Laminate floor coverings浸渍纸层压木质地板

GB/T 18103 Engineered wood flooring实木复合地板

GB/T 18580 Indoor decorating and refurbishing materials

GB/T 19367 Wood-based panels. Determination of dimensions of panels人造板的尺寸测定

GB/T 19367.1 Wood-based panels-Determination of thickness、width and length of boards人造板 板的厚度、宽度及长度的测定

GB/T 19367.2 Wood-based panels-Determination of squareness and straightness of boards人造板 板的垂直度和边缘直度的测定

GB/T 20036 Textile machinery and accessories Paper patterns of dobbies-Dimensions纺织机械与附件多臂装置用连续纹纸尺寸

GB/T 2406.2 Plastics. Determination of burning behaviour by oxygen index. Part 2:Ambient-temperature test塑料.用氧指数法测定燃烧行为.第2部分:室温试验

GB/T 2408 Plastics---Determination of burning characteristics---Horizontal and vertical test塑料 燃烧性能的测定 水平法和垂直法

GB/T 4100 Ceramic tiles陶瓷砖

GB/T 4893.4 Test of surface coatings of furniture. Part 4:Determination of adhesion. Cross cut家具表面漆膜理化性能试验 第4部分:附着力交叉切割测定法

GB/T 4897 刨花板 Particleboard（ISO 16893-2:2010, Wood-based panels-Particleboard-Part 2: Requirements, MOD)

GB/T 5849 Blockboard细木工板

GB/T 6739 Paints and varnishes-Determination of film hardness by pencil test色漆和清漆.铅笔法测定漆膜硬度

GB/T 7911 热固性树脂浸渍纸高压装饰层积板(HPL) High-pressure decorative laminates-Sheets made from thermosetting resins

GB/T 9341 Plastics--Determination of flexural properties塑料弯曲性能试验方法

GB/T 9846.3 Plywood-Part 3:General specification for plywood for general use胶合板 第3部分;普通胶合板通用技术条件

GB/T 9846 普通胶合板Plywood for general use

GB/T15036-1 Solid wood floor-Part 1: Technical requirement实木地板 第1部分：技术要求

GB/T15036-2 Solid wood flooring-Part 2:Examination methods实木地板第2部分:检验方法

GB/T9846.2 Plywood-Part 2:Tolerances on dimensions胶合板 第2部分;尺寸公差

LY/T 1580 定向刨花板 Oriented strand board

LY/T 1614 Glued laminated timber flooring实木集成地板

LY/T 1700 Wooden floor for floor heating地采暖用木质地板

LY/T 1861 Wood decking used out-door户外用木地板

赛德斯威(SATISFY)将提供人造装饰板测试的一站式服务，包括前期的评估、相关资料准备和提交、测试的全程跟进以及报告解读、数据分析和整改建议。联系我们<获取更多信息。